Hello, I have been searching the internet as to how to enable the OS watchdog timer mechanism in IBM x343.
I tried setting the watchdog timer at the BIOS utility, and what I wanted to know is how to reset the timer so as not to reboot the system during normal operation. The box is run by FreeBSD 6.2, and I can't just use the IBM director and/or the IBM director client as basically, it won't run on the said OS. Adding out-band management card will also not help as basically the box doesn't support such. I've learned that the built-in service processor can be accessed using the SMbus driver, but said driver is only for Windows/Linux. However, there should be a way how to access/control the watchdog timer either by using a BIOS interrupt call or a service. I need to send a heartbeat to the watchdog to continuously reset the timer. Thanks and best regards, Won _______________________________________________ freebsd-hardware@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hardware To unsubscribe, send any mail to "[EMAIL PROTECTED]"