At 11:11 AM 8/12/2008, Andrew Hotlab wrote:
You can confirm me that you are successfully using FreeBSD 7.0R with
the 1.43 firmware? If it's so, we might compare our hardware
components to find out if and what are differences...
Hi,
The dmesg below is on a supermicro board. Actually, if you
take the Areca out, does 7.0R boot up ? As mentioned by another
poster, try the RELENG_7 snapshot to see if it boots with that. If
you are starting fresh, I would suggest it as there are a number of
bug fixes and enhancements in the snapshot and its quite stable.
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-PRERELEASE #3: Wed Feb 13 11:51:23 EST 2008
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/db
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU 3060 @ 2.40GHz (2400.10-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
usable memory = 8577662976 (8180 MB)
avail memory = 8298295296 (7913 MB)
ACPI APIC Table: <INTEL S3000AH>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 5
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <INTEL S3000AH> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 92a092a0600092a
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 92a092a0600092a
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
arcmsr0: <Areca SATA Host Adapter RAID Controller
> mem 0xe8600000-0xe8600fff,0xe8000000-0xe83fffff irq 18 at device
14.0 on pci2
ARECA RAID ADAPTER0: Driver Version 1.20.00.15 2007-10-07
ARECA RAID ADAPTER0: FIRMWARE VERSION V1.43 2007-4-17
arcmsr0: [ITHREAD]
pcib3: <PCI-PCI bridge> at device 0.2 on pci1
pci3: <PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 28.5 on pci0
pci5: <ACPI PCI bus> on pcib5
em0: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port
0x2000-0x201f mem 0xe8580000-0xe859ffff,0xe8500000-0xe857ffff irq 17
at device 0.0 on pci5
em0: Using MSI interrupt
em0: Ethernet address: 00:15:17:50:40:28
em0: [FILTER]
pci5: <simple comms, UART> at device 0.3 (no driver attached)
pci5: <serial bus> at device 0.4 (no driver attached)
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci6: <ACPI PCI bus> on pcib6
vgapci0: <VGA-compatible display> port 0x1000-0x10ff mem
0xe0000000-0xe7ffffff,0xe8440000-0xe844ffff irq 18 at device 4.0 on pci6
em1: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port
0x1100-0x113f mem 0xe8420000-0xe843ffff,0xe8400000-0xe841ffff irq 17
at device 5.0 on pci6
em1: Ethernet address: 00:15:17:50:40:29
em1: [FILTER]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x3030-0x303f irq 18 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <Intel ICH7 SATA300 controller> port
0x3048-0x304f,0x3064-0x3067,0x3040-0x3047,0x3060-0x3063,0x3020-0x302f
mem 0xe8700000-0xe87003ff irq 19 at device 31.2 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f0 irq 6 drq 2 on acpi0
fdc0: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A, console
sio0: [FILTER]
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcafff,0xcb000-0xcbfff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
Waiting 5 seconds for SCSI devices to settle
(probe16:arcmsr0:0:16:0): inquiry data fails comparison at DV1 step
da0 at arcmsr0 bus 0 target 0 lun 0
da0: <Areca ARC-1210-VOL#00 R001> Fixed Direct Access SCSI-5 device
da0: 166.666MB/s transfers (83.333MHz DT, offset 32, 16bit)
da0: 305175MB (624999424 512 byte sectors: 255H 63S/T 38904C)
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/da0s1a
Thanks a lot for your help.
----------------------------------------
> From: [EMAIL PROTECTED]
> To: [EMAIL PROTECTED]
> Subject: Re: Areca ARC-1120 on FreeBSD 7.0
> Date: Tue, 12 Aug 2008 08:13:56 -0400
>
> On Mon, 11 Aug 2008 22:54:41 +0000, in sentex.lists.freebsd.hardware
> you wrote:
>>arcmsr0: mem 0xfc7ff000-0xfc7fffff,0xfc000000-0xfc3fffff irq 31
at device 14.0 on pci2
>>arcmsr0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfc7ff000
>>ARECA RAID ADAPTER0: Driver Version 1.20.00.15 2007-10-07
>>ARECA RAID ADAPTER0: FIRMWARE VERSION V1.39 2006-2-9
>
>
> Not sure it will help you or not, but I run the same card with version
> 1.43 of the firmware. I would try to upgrade the Areca card's
> firmware and then give 7.0R another try.
>
> ---Mike
_________________________________________________________________
Invite your mail contacts to join your friends list with Windows
Live Spaces. It's easy!
http://spaces.live.com/spacesapi.aspx?wx_action=create&wx_url=/friends.aspx&mkt=en-us
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
