Attachment not getting throuh. Panic transcribed below.
/Eirik
On Jan 21, 2009, at 20:53, Eirik Øverby wrote:
Hi folks,
see attached screenshot for panic screen. This happens when booting
from 7.1-release CD. The box is a Sun X2200 M2, the controller is a
2-port SATA-II controller with 128mb cache memory. One drive is set
as single drive (RAID-0), another as passthrough (to get hold of
some data from pre-areca times).
Another Areca controller in another box (different controller model
(4-chan sata) and box (tyan transport)) works just fine.
Input welcome.
/Eirik
(probe16:arcmsr0:0:16:0): inquiry data fails comparison at DV1 step
arcmsr0: isr get an illegal srb command doneacb=´0xffffffff8124e000´
srb=0xffff
ffffaeb6c420´ srbacb=´0xffffffff8124e000´
startdone=0x3c3csrboutstandingcount=-1
Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address = 0x34be2988
fault code = supervisor read data, page not present
instruction pointer = 0x8:0xffffffff807914c3
stack pointer = 0x10:0xffffffffaecaab60
frame pointer = 0x10:0xffffffff8124e000
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 36 (irq17: arcmsr0)
trap number = 12
panic: page fault
_______________________________________________
freebsd-hardware@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
To unsubscribe, send any mail to "freebsd-hardware-unsubscr...@freebsd.org"
