In message <201105231026.54178....@freebsd.org>, John Baldwin (j...@freebsd.org) wrote: > On Sunday, May 22, 2011 7:00:02 am N.J. Mann wrote: > > Hi, > > > > > > I am trying to setup a console server, but I am having a problem with > > the hardware. The RS-232 card I am using is a Sunix 4056A Universal PCI > > 4 port RS-232 card. However, only two ports are being configured, uart2 > > and uart3 - uart0 and uart1 are on the motherboard. I had assumed that > > all I had to do was install the card, add puc(4) to my kernel and it > > would just work. > > > > uname: > > ------ > > FreeBSD 9.0-CURRENT #0: Thu May 19 15:01:10 UTC 2011 i386 > > > > I CVSup'ed about fours before then. > > > > > > relevant parts of verbose dmesg: > > -------------------------------- > > found-> vendor=0x1409, dev=0x7168, revid=0x01 > > domain=0, bus=0, slot=10, func=0 > > class=07-00-02, hdrtype=0x00, mfdev=0 > > cmdreg=0x0081, statreg=0x0280, cachelnsz=0 (dwords) > > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > > intpin=a, irq=3 > > map[10]: type I/O Port, range 32, base 0xe000, size 5, enabled > > map[14]: type I/O Port, range 32, base 0xe400, size 4, enabled > > pcib0: matched entry for 0.10.INTA > > pcib0: slot 10 INTA hardwired to IRQ 18 > > [...] > > puc0: <Timedia technology 4 Port Serial> port 0xe000-0xe01f,0xe400-0xe40f > > irq 18 at device 10.0 on pci0 > > ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 52 > > uart2: <16550 or compatible> on puc0 > > uart2: fast interrupt > > uart3: <16550 or compatible> on puc0 > > uart3: fast interrupt > > > > > > I can provide a full verbose dmesg if required, together with any other > > information which may be relevant. > > > > Any and all help gratefully received. > > Hmm, for Timedia it looks like the puc(4) driver uses the subvendor device ID > to figure out how many ports your card has, but it does see 4 ports (the > device descrption is correct). Does 'devinfo -v' show any other child > devices of 'puc0' besides the two uart devices?
No. puc0 pnpinfo vendor=0x1409 device=0x7168 subvendor=0x1409 subdevice=0x4056 class=0x070002 at slot=10 function=0 uart2 uart3 (If you want the complete output of devinfo just ask - I assumed from your question you only wanted the puc-releated section.) BTW I saw the patch for puc(4) you just posted to current@. Is it worth me trying that? Many thanks. Cheers, Nick. -- _______________________________________________ freebsd-hardware@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hardware To unsubscribe, send any mail to "freebsd-hardware-unsubscr...@freebsd.org"