On 5/27/2011 8:05 AM, John Baldwin wrote: > > Oh, hmm, looks like the clock has an unusual multiplier. Does it work if you > use 'cu -l -s 1200' to talk at 9600 for example? (In general use speed / 8 > as the speed to '-s'.) > > Also, is your card a modem or a dual-port card?
If I add in the device IDs, I am not able to talk to it at any speed. However, the port that is exposed, might just not be echoing back chars and the second port which is not showing up, might be the "control port" ? uart2@pci0:5:0:0: class=0x070002 card=0x20282205 chip=0x015213a8 rev=0x02 hdr=0x00 vendor = 'Exar Corp.' device = 'XR17C/D152 Dual PCI UART' class = simple comms subclass = UART -- ------------------- Mike Tancsa, tel +1 519 651 3400 Sentex Communications, m...@sentex.net Providing Internet services since 1994 www.sentex.net Cambridge, Ontario Canada http://www.tancsa.com/ _______________________________________________ freebsd-hardware@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hardware To unsubscribe, send any mail to "freebsd-hardware-unsubscr...@freebsd.org"