On 5/29/2012 9:01 PM, YongHyeon PYUN wrote: > On Fri, May 25, 2012 at 10:14:27PM -0400, Mike Tancsa wrote: >> My recent batch of realtek nics seems to have a version that does not >> work with RELENG_8 or RELENG_9. Anyone know what the issue might be ? >> >> >> re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> at device >> 0.0 on pci4 >> re0: Using 1 MSI-X message >> re0: turning off MSI enable bit. >> re0: ASPM disabled >> re0: Chip rev. 0x7c800000 > ^^^^^^^^^^ > > If memory serves me right there would be no known controller for > revision 0x7c800000. Actually I wonder how re(4) can attach to > this unknown device. > Did you apply local patch?
Hi, No, its a stock kernel. If I add hw.re.msix_disable=1 hw.re.msi_disable=1 it sort of comes up re0 pnpinfo vendor=0x10ec device=0x8168 subvendor=0x10ec subdevice=0x8168 class=0x020000 at slot=0 function=0 miibus0 rgephy0 pnpinfo oui=0xe04c model=0x11 rev=0x2 at phyno=1 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xfe200000-0xfe200fff,0xf0000000-0xf0003fff irq 18 at device 0.0 on pci4 re0: Chip rev. 0x28000000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Ethernet address: 00:0a:cd:1c:ba:89 but doing ifconfig re0 up, does not work as dmesg shows re0: reset never completed! re0: PHY write failed re0: PHY write failed re0: PHY write failed re0: PHY write failed re0: PHY write failed re0: PHY write failed re0: PHY write failed re0@pci0:4:0:0: class=0x020000 card=0x816810ec chip=0x816810ec rev=0x03 hdr=0x00 vendor = 'Realtek Semiconductor Co., Ltd.' device = 'RTL8111/8168B PCI Express Gigabit Ethernet controller' class = network subclass = ethernet bar [10] = type I/O Port, range 32, base 0xd000, size 256, disabled bar [18] = type Memory, range 64, base 0xfe200000, size 4096, disabled bar [20] = type Prefetchable Memory, range 64, base 0xf0000000, size 16384, disabled -- ------------------- Mike Tancsa, tel +1 519 651 3400 Sentex Communications, m...@sentex.net Providing Internet services since 1994 www.sentex.net Cambridge, Ontario Canada http://www.tancsa.com/ _______________________________________________ freebsd-hardware@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hardware To unsubscribe, send any mail to "freebsd-hardware-unsubscr...@freebsd.org"