It's not uath. It's a different beast entirely. Basically, it requires someone with USB clue to write the USB glue between the ath(4) and ath_hal(4) code and the USB interface.
Look at what ath9k_htc implements. It uses most of ath9k, but it implements a data/control pipe over USB and some commands to tell the firmware to do things (like new/delete client, etc.) -adrian On 18 July 2013 08:39, CeDeROM <cede...@tlen.pl> wrote: > Hello :-) > > I have just bought USB WiFi b/g/n dongle from TP-LINK model TL-WN822B > Ver:2.0 [1] which use following chipsets: Atheros AR9002U-2NG, Atheros > AR7010, Atheros AR9287. It looks nice bacuse it cost ~20EUR it has > external antennas and has very good opinions. Now, I start to think > that finding Ver:3.0 based on RTL8192CU [2] might be a better > choice..? Still I consider Atheros to be a better solution than > Realtek..? > > I have made simple modification of /usr/src/sys/dev/usb/usbdevs and > /usr/src/sys/dev/usb/wlan/if_uath.c to get it recognised, but uath > driver seems to only support AR5005UG according to manpage. Is there > any known driver to operate AR9002 chips? > > Here is what dmesg shows after my kernel modification/rebuild: > > ugen1.3: <ATHEROS> at usbus1 > uath0: <ATHEROS USB WLAN, rev 2.00/2.02, addr 3> on usbus1 > uath0: could not allocate USB transfers, err=USB_ERR_NO_PIPE > device_attach: uath0 attach returned 12 > > So it looks this driver will not operate with this chipset..? > > Any hints appreciated! :-) > Tomek > > [1] http://wikidevi.com/wiki/TP-LINK_TL-WN822N_v2 > [2] http://wikidevi.com/wiki/TP-LINK_TL-WN822N_v3 > > -- > CeDeROM, SQ7MHZ, http://www.tomek.cedro.info > _______________________________________________ > freebsd-...@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-usb > To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org" _______________________________________________ freebsd-hardware@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hardware To unsubscribe, send any mail to "freebsd-hardware-unsubscr...@freebsd.org"