Hi all,

both, the mainboard (with recent firmware P3.10) and Ryzen 7 CPU
should work with ECC RAM (while not officially supported).
RAM is KSM26ED8/16ME DDR4-2666 ECC DIMM.

AFAIdmesg and dmidecode do not indicate ECC (see below), I think.
Data path should show additional ECC bits.

There is only one related BIOS setting, I’m aware of.
Changing this from AUTO to ENABLED makes no difference.

Quick answer would be very helpfull.

Thanks Axel
PS: parts from dmesg and demidecode:

---<<BOOT>>---
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.1-RC1 r353428 GENERIC amd64
FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 
8.0.1)
VT(efifb): resolution 800x600
CPU: AMD Ryzen 7 3700X 8-Core Processor              (3593.32-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0x870f10  Family=0x17  Model=0x71  Stepping=0
  
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  
Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  AMD 
Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,<b30>>
  Structured Extended 
Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA>
  Structured Extended Features2=0x400004<UMIP,RDPID>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  AMD Extended Feature Extensions ID EBX=0x10eb757<CLZERO,IRPerf,XSaveErPtr>
  SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
  TSC: P-state invariant, performance statistics
real memory  = 68719476736 (65536 MB)
avail memory = 66818646016 (63723 MB)

. . .

root@b5:~ # dmidecode  -t memory
# dmidecode 3.2
# SMBIOS entry point at 0xed2b3000
Found SMBIOS entry point in EFI, reading table from /dev/mem.
SMBIOS 3.2 present.

Handle 0x000F, DMI type 16, 23 bytes
Physical Memory Array
        Location: System Board Or Motherboard
        Use: System Memory
        Error Correction Type: Multi-bit ECC
        Maximum Capacity: 128 GB
        Error Information Handle: 0x000E
        Number Of Devices: 4

Handle 0x0017, DMI type 17, 84 bytes
Memory Device
        Array Handle: 0x000F
        Error Information Handle: 0x0016
        Total Width: 128 bits
        Data Width: 64 bits
        Size: 16384 MB
        Form Factor: DIMM
        Set: None
        Locator: DIMM 0
        Bank Locator: P0 CHANNEL A
        Type: DDR4
        Type Detail: Synchronous Unbuffered (Unregistered)
        Speed: 2666 MT/s
        Manufacturer: Kingston
        Serial Number: E72F267D
        Asset Tag: Not Specified
        Part Number: 9965745-002.A00G
        Rank: 2
        Configured Memory Speed: 2400 MT/s
        Minimum Voltage: 1.2 V
        Maximum Voltage: 1.2 V
        Configured Voltage: 1.2 V
        Memory Technology: DRAM
        Memory Operating Mode Capability: Volatile memory
        Firmware Version: Unknown
        Module Manufacturer ID: Bank 2, Hex 0x98
        Module Product ID: Unknown
        Memory Subsystem Controller Manufacturer ID: Unknown
        Memory Subsystem Controller Product ID: Unknown
        Non-Volatile Size: None
        Volatile Size: 16 kB
        Cache Size: None
        Logical Size: None

. . .
---
PGP-Key: CDE74120  ☀  computing @ chaos claudius

Attachment: signature.asc
Description: Message signed with OpenPGP

Reply via email to