Hi,
I've running FreeBSD 13.1 RELEASE. # pciconf -lv [...]re0@pci0:3:0:0: class=0x020000 rev=0x06 hdr=0x00 vendor=0x1186 device=0x4300 subvendor=0x1186 subdevice=0x4b10
vendor = 'D-Link System Inc' device = 'DGE-528T Gigabit Ethernet Adapter' class = network subclass = ethernetre1@pci0:4:0:0: class=0x020000 rev=0x05 hdr=0x00 vendor=0x10ec device=0x8125 subvendor=0x1458 subdevice=0xe000
vendor = 'Realtek Semiconductor Co., Ltd.' device = 'RTL8125 2.5GbE Controller' class = network subclass = ethernet # ifconfig re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=201b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,WOL_MAGIC> ether 08:5a:11:32:e6:53 inet 192.168.100.200 netmask 0xffffff00 broadcast 192.168.100.255 media: Ethernet autoselect (100baseTX <full-duplex>) status: active nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=201b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,WOL_MAGIC> ether d8:5e:d3:98:1a:90 inet 192.168.0.200 netmask 0xffffff00 broadcast 192.168.0.255 media: Ethernet autoselect (1000baseT <full-duplex>) status: active nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>Without installing realtek-re-kmod-196.04 from packages, re1 undetected. But if I installing and activated through /boot/loader.conf:
if_re_load="YES" if_re_name="/boot/modules/if_re.ko" hw.re.max_rx_mbuf_sz="2048"re0 always runs 100baseTX, if I disable via /boot/loader.conf. re1 gone and re0 back runs 1000baseT. Any suggestion for this problem? Thanks.
-- Regards, Budi Janto
OpenPGP_signature
Description: OpenPGP digital signature