Hi Running FreeBSD6.1-RC Kernel compiled with the following
options IPFIREWALL #firewall options IPFIREWALL_VERBOSE #enable logging to syslogd(8) options IPFIREWALL_FORWARD #enable transparent proxy options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by options IPDIVERT #divert sockets options DUMMYNET options BRIDGE options HZ=1000 options FAST_IPSEC options TCP_SIGNATURE device crypto device cryptodev device carp Problem is with the CARP addresses staying in the "master" "master" position when I have dummynet stripping bandwidth on that vlan. I take the dummnet config away then the carp interfaces go to "master" and "backup" as required. My dummynet configs look like this ipfw pipe 100 config bw 10500Kbit/s #setup shaping pipes 10Mbit ipfw queue 1 config pipe 100 weight 100 ipfw queue 2 config pipe 100 weight 100 ipfw add 1000 queue 1 ip from any to any in via vlan148 ipfw add 1000 queue 2 ip from any to any out via vlan148 I have an open FW so no carp message should be blocked is dummynet broken? Regards Tyrone This e-mail is intended only for the use of the addressees named above and may be confidential. If you are not an addressee you must not use any information contained in nor copy it nor inform any person other than the addressees of its existence or contents. _______________________________________________ freebsd-ipfw@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ipfw To unsubscribe, send any mail to "[EMAIL PROTECTED]"