From: James [mailto:[EMAIL PROTECTED] > > I have two boxes behind em0 that I can use to generate > 250kpps to another vlan > within em0 card as a test, so that bge0 is not involved in > the stress test. > Even when doing so, CPU load climbs higher with device > polling turned on. > Opened up systat, etc to check the interrupts, and em0 is > generating 0 > interrupts with device polling on (as obvious), but general > interrupt load > climbs rock high.. so I don't know what's causing it to > climb. Cleared the > firewall rules as well as a test... no difference :( > > Oh also, just FYI, each vlan interface has link0 set, since > em(4) supports > hardware 802.1q tag/detagging. >
The CPU time during the 'polling' is charged to interrupt, even though it occurs during softclock. That's why you see 0 interrupts, but high CPU usage in interrupt. Did u try lowering the 'register' access? --don _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "[EMAIL PROTECTED]"