On Tue, 29 Mar 2005, John Mok wrote:


After issuing the following commands :-

#ngctl mkpeer sync_ar0: frame_relay rawdata downstream
#ngctl mkpeer sync_ar0:rawdata lmi dlci0 ansi
#ngctl mkpeer sync_ar0:rawdata rfc1490 dlci16 rfc1490
#ngctl mkpeer sync_ar0:rawdata dlci16 rl0 inet inet
#ifconfig ng0 1.2.3.4 5.6.7.8
ifconfig: interface ng0 does not exist

The command ifconfig shows :-

rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
  options=8<VLAN_MTU>
  inet6 fe80::207:40ff:fe09:f09%rl0 prefixlen 64 scopeid 0x1
  inet 192.168.255.254 netmask 0xffffff00 broadcast 192.168.255.255
  ether 00:07:40:09:0f:09
  media: Ethernet autoselect (none)
  status: no carrier
xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
  options=9<RXCSUM,VLAN_MTU>
  inet6 fe80::201:3ff:fec1:9c58%xl0 prefixlen 64 scopeid 0x2
  ether 00:01:03:c1:9c:58
  media: Ethernet autoselect (100baseTX <full-duplex>)
  status: active
xl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
  options=9<RXCSUM,VLAN_MTU>
  inet6 fe80::201:3ff:fe34:61af%xl1 prefixlen 64 scopeid 0x3
  inet 192.168.16.254 netmask 0xffffff00 broadcast 192.168.16.255
  ether 00:01:03:34:61:af
  media: Ethernet autoselect (100baseTX <full-duplex>)
  status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
  inet6 ::1 prefixlen 128
  inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
  inet 127.0.0.1 netmask 0xff000000

and the command "ngctl list" shows :-

There are 4 total nodes:
Name: ngctl811        Type: socket          ID: 00000011   Num hooks: 0
Name: <unnamed>       Type: frame_relay     ID: 00000004   Num hooks: 1
Name: sync_ar1        Type: sync_ar         ID: 00000002   Num hooks: 0
Name: sync_ar0        Type: sync_ar         ID: 00000001   Num hooks: 1

Would it be the problem that I test it with cable disconnected from the modem (i.e.CSU/DSU)?

Thanks a lot.

John Mok


Julian Elischer wrote:

did the last command do anything?

please show the output of:
ifconfig
ngctl list


You have ng_ether or ng_iface loaded ?

_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to