Hi,
I have some problem with my mpd PPPoe server in FreeBSD 6.0. Everything is
working fine except some problems.
I have several users connected to 2 DSLAMs. Users, who is connected to
first DSLAM, are working fine, they can log in.
However users, who is connected to second DSLAM, are having problem logging
in. They can't log in, however after restarting mpd
problem goes away.
I see errors in mpd.log something like:
Nov 14 10:15:12 gw mpd: [pppoe10] LCP: SendConfigReq #128
Nov 14 10:15:12 gw mpd: PROTOCOMP
Nov 14 10:15:12 gw mpd: MRU 1492
Nov 14 10:15:12 gw mpd: MAGICNUM 4afa9f5a
Nov 14 10:15:12 gw mpd: AUTHPROTO PAP
Nov 14 10:15:14 gw mpd: [pppoe10] LCP: rec'd Configure Reject #127 link 0
(Ack-Sent)
Nov 14 10:15:08 gw mpd: [pppoe10] LCP: Up event
Nov 14 10:15:08 gw mpd: [pppoe10] LCP: state change Starting --> Req-Sent
Nov 14 10:15:08 gw mpd: [pppoe10] LCP: phase shift DEAD --> ESTABLISH
Nov 14 10:15:08 gw mpd: [pppoe10] LCP: SendConfigReq #126
Nov 14 10:15:08 gw mpd: PROTOCOMP
Nov 14 10:15:08 gw mpd: MRU 1492
Nov 14 10:15:08 gw mpd: MAGICNUM 4afa9f5a
Nov 14 10:15:08 gw mpd: AUTHPROTO PAP
Nov 14 10:15:10 gw mpd: [pppoe10] LCP: SendConfigReq #127
Nov 14 10:15:10 gw mpd: PROTOCOMP
Nov 14 10:15:10 gw mpd: MRU 1492
Nov 14 10:15:10 gw mpd: MAGICNUM 4afa9f5a
Nov 14 10:15:10 gw mpd: AUTHPROTO PAP
Nov 14 10:15:11 gw mpd: [pppoe10] LCP: rec'd Configure Request #189 link 0
(Req-Sent)
Nov 14 10:15:11 gw mpd: MRU 1492
Nov 14 10:15:11 gw mpd: [pppoe10] LCP: SendConfigAck #189
Nov 14 10:15:11 gw mpd: MRU 1492
Nov 14 10:15:11 gw mpd: [pppoe10] LCP: state change Req-Sent --> Ack-Sent
Nov 14 10:15:11 gw mpd: [pppoe10] LCP: rec'd Configure Reject #126 link 0
(Ack-Sent)
Nov 14 10:15:11 gw mpd: Wrong id#, expecting 127
Nov 14 10:15:12 gw mpd: [pppoe10] LCP: SendConfigReq #128
Nov 14 10:15:12 gw mpd: PROTOCOMP
Nov 14 10:15:12 gw mpd: MRU 1492
Nov 14 10:15:12 gw mpd: MAGICNUM 4afa9f5a
Nov 14 10:15:12 gw mpd: AUTHPROTO PAP
Nov 14 10:15:14 gw mpd: [pppoe10] LCP: rec'd Configure Reject #127 link 0
(Ack-Sent)
Nov 14 10:15:14 gw mpd: Wrong id#, expecting 128
Nov 14 10:15:14 gw mpd: [pppoe10] LCP: SendConfigReq #129
In the log it says LCP: "rec'd Configure Reject #127 link 0 (Ack-Sent),
Wrong id#, expecting 128".
Maybe I'm missing something in the mpd configuration. I appreciate if
somebody help me to solve this problem.
thanks,
Ganbold
My mpd config file:
default:
load server1
load server2
load server3
load server4
load server5
load server6
pppoe_standard:
set bundle no multilink
set bundle enable compression
set bundle accept encryption
set bundle max-logins 3
set bundle enable radius-acct
set bundle enable radius-auth
set iface idle 0
set iface disable on-demand
set iface disable proxy-arp
set iface enable tcpmssfix
set iface mtu 1500
set iface route default
set link type pppoe
set link mtu 1500
set link no chap
set link enable pap
# set link keep-alive 60 180
set link keep-alive 10 60
set link max-redial -1
set link mtu 1492
set link latency 0
set link bandwidth 1224000
set ccp yes mpp-e40
set ccp yes mpp-e128
set ccp yes mpp-stateless
set pppoe iface fxp1
set pppoe service "*"
set pppoe disable originate
set pppoe enable incoming
set ipcp dns x.x.x.x
set ipcp yes vjcomp
set ipcp no vjcomp
set radius server x.x.x.x 1812 1813
set radius timeout 10
set radius config /etc/ppp/radius.conf
set radius retries 3
server1:
new -i ng1 pppoe1 pppoe1
set ipcp ranges 192.168.5.2/32 192.168.5.128/25
load pppoe_standard
server2:
new -i ng2 pppoe2 pppoe2
set ipcp ranges 192.168.5.2/32 192.168.5.129/25
load pppoe_standard
server3:
new -i ng3 pppoe3 pppoe3
set ipcp ranges 192.168.5.2/32 192.168.5.130/25
load pppoe_standard
server4:
new -i ng4 pppoe4 pppoe4
set ipcp ranges 192.168.5.2/32 192.168.5.131/25
load pppoe_standard
server5:
new -i ng5 pppoe5 pppoe5
set ipcp ranges 192.168.5.2/32 192.168.5.132/25
load pppoe_standard
server6:
new -i ng6 pppoe6 pppoe6
set ipcp ranges 192.168.5.2/32 192.168.5.133/25
load pppoe_standard
mpd.links file:
pppoe1:
set link type pppoe
set pptp self 192.168.5.2
set pppoe enable incoming
set pppoe disable originate
pppoe2:
set link type pppoe
set pptp self 192.168.5.2
set pppoe enable incoming
set pppoe disable originate
pppoe3:
set link type pppoe
set pptp self 192.168.5.2
set pppoe enable incoming
set pppoe disable originate
pppoe4:
set link type pppoe
set pptp self 192.168.5.2
set pppoe enable incoming
set pppoe disable originate
pppoe5:
set link type pppoe
set pptp self 192.168.5.2
set pppoe enable incoming
set pppoe disable originate
pppoe6:
set link type pppoe
set pptp self 192.168.5.2
set pppoe enable incoming
set pppoe disable originate
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
