Carlos E Gaspar wrote:
Hi.
I have the following setup:
FreeBSD abc5.5-PRERELEASE FreeBSD 5.5-PRERELEASE #0: Wed Apr 26
14:58:22 BRT 2006 [EMAIL PROTECTED]:/usr/src/sys/alpha/compile/ABC alpha
bridge0: flags=8043<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
ether xx:xx:xx:xx:xx:xx
priority 32768 hellotime 2 fwddelay 15 maxage 20
member: de1 flags=3<LEARNING,DISCOVER>
member: de0 flags=3<LEARNING,DISCOVER>
de1 is my internal interface (local) and de0 the external (internet).
host1 is on de1. Bridge works fine (if_bridge).
With the following sysctl's:
net.link.bridge.pfil_onlyip: 0
net.link.bridge.pfil_member: 1
net.link.bridge.pfil_bridge: 0
net.link.bridge.ipfw: 0
net.link.ether.ipfw: 1
I'm trying to divert layer2 packets using this ipfw rule, but the
counters are always 0 0 as seen with 'ipfw show'.
I don't know about if_bridge but layer2 and divert are not allowed
together..
I have changes that make it work in 4.x but they will not apply to 5.x
or later..
Luigi also has some changes that allow it..
divert 8000 log all from host1 to any layer2 in via de1
What's wrong? It's possible to do that with if_bridge? Do I need FBSD
6.1?
Thanks for advance... sorry about my english
Carlos Gaspar
[EMAIL PROTECTED]
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
