I'm trying to get CARP up and running on a pair of BSD6 boxes. Box1 rc.conf exerpts: ifconfig_bge0="inet 192.168.100.41 netmask 255.255.255.0" ifconfig_bge1="inet 192.168.101.101 netmask 255.255.255.0" cloned_interfaces="carp0 carp1" ifconfig_carp0="vhid 10 pass redgiant advskew 10 192.168.100.40/24" ifconfig_carp1="vhid 20 pass whitedwarf advskew 10 192.168.101.100/24"
Box2 rc.conf exerpts: ifconfig_bge0="inet 192.168.100.42 netmask 255.255.255.0" ifconfig_bge1="inet 192.168.101.102 netmask 255.255.255.0" cloned_interfaces="carp0 carp1" ifconfig_carp0="vhid 10 advskew 100 pass redgiant 192.168.100.40/24" ifconfig_carp1="vhid 20 advskew 100 pass whitedwarf 192.168.101.100/24" Carp is up. I can fail state back and forth, but the VIP is not pingable from outside whichever box is the master. A look at ifconfig reveals : on box 1: carp0: flags=49<UP,LOOPBACK,RUNNING> mtu 1500 inet 192.168.100.40 netmask 0xffffff00 carp: MASTER vhid 10 advbase 1 advskew 10 carp1: flags=49<UP,LOOPBACK,RUNNING> mtu 1500 inet 192.168.101.100 netmask 0xffffff00 carp: MASTER vhid 20 advbase 1 advskew 10 and on box 2: carp0: flags=49<UP,LOOPBACK,RUNNING> mtu 1500 inet 192.168.100.40 netmask 0xffffff00 carp: BACKUP vhid 10 advbase 1 advskew 100 carp1: flags=49<UP,LOOPBACK,RUNNING> mtu 1500 inet 192.168.101.100 netmask 0xffffff00 carp: BACKUP vhid 20 advbase 1 advskew 100 I have a working 5.4 box running carp with a pretty much identical config and, well, its working. I just cant seem to make these BSD6 boxes behave. Any suggestions? -- -------------------------------------------------------------------- - Tom Arnold - "...is it a virus, a drug, or a religion?" - Sysabend Caretaker - Juanita Shrugs. "What's the difference?" ------------------------ -- Neal Stephenson, Snow Crash _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "[EMAIL PROTECTED]"