<quote who="Alexei">
> Hello.
>
>>> set link mtu 1498
>> ^^^^^^^^^^^^^^^^^^^^^^^^^
>> first, check this
>
> What should I put there? BTW, how can it make mpd ignore rc.d stop
> command?
>
set link mtu 1492
check with ps command in which state mpd is when issuing rc.d stop
command.
mine config:
new -i ng0 PPPoE PPPoE
set iface addrs 1.1.1.1 2.2.2.2
set iface disable on-demand
set iface idle 0
set iface enable tcpmssfix
set bundle disable multilink
set bundle disable compression
set bundle authname "XXXXXXXXXX"
set bundle password "YYYYYYYYYY"
set link no acfcomp protocomp
set link disable pap chap
set link accept chap
set link mtu 1492
set link mru 1492
set link keep-alive 10 60
set ipcp no vjcomp
set ipcp ranges 0.0.0.0/0 0.0.0.0/0
open iface
and in mpd.links:
PPPoE:
set link type pppoe
set pppoe iface rl0
set pppoe service "ProviderName"
set pppoe disable incoming
set pppoe enable originate
works fine
>
>> also check your firewall.
>
> Nothing prevents it + ppp works fine. (But I don't like it for high
> cpu load)
much better to show your rulebase
--
Sincerely yours,
Artyom Viklenko.
-------------------------------------------------------
[EMAIL PROTECTED] | http://www.aws-net.org.ua/~artem
FreeBSD: The Power to Serve - http://www.freebsd.org
_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
