Mihai Tanasescu wrote:
Sorry for asking as a follow-up to your question...but do you have a
working config for MPD and pptp.
I'm desperately trying to get mine to work...but mpd refuses to listen
to connections on my interface (it starts, it gives no errors, it
loads the pptp1 config, I can access its console, etc).
Something like:
default:
load pptp0
load pptp1
pptp0:
new -i ng0 pptp0 pptp0
set ipcp ranges 192.168.1.2/32 192.168.5.1/24
load pptp_standard
pptp1:
new -i ng1 pptp1 pptp1
set ipcp ranges 192.168.1.2/32 192.168.5.2/24
load pptp_standard
pptp_standard:
set iface idle 0
set iface disable on-demand
set iface disable proxy-arp
set iface enable tcpmssfix
set iface mtu 1500
set iface route default
set iface enable radius-session
set bundle no multilink
set bundle disable multilink
set bundle enable compression
set bundle max-logins 3
set bundle enable radius-acct
set bundle enable radius-auth
# set link type pptp
set link no pap
set link enable chap
set link keep-alive 10 60
set link max-redial -1
set link yes acfcomp protocomp
set link mtu 1460
set link latency 0
set ipcp dns 192.168.1.1 192.168.0.1
set ipcp yes vjcomp
set ccp yes mppc
set ccp yes mpp-e40
mpd.links
---------------------------------------
pptp0:
set link type pptp
set pptp self 192.168.1.1
set pptp enable incoming
set pptp disable originate
pptp1:
set link type pptp
set pptp self 192.168.1.1
set pptp enable incoming
set pptp disable originate
set ccp yes mpp-e128
set ccp yes mpp-stateless
set pptp self 192.168.1.1
set pptp enable incoming
set pptp disable originate
###############
set radius timeout 10
set radius config /usr/local/etc/mpd/radius.conf
set radius retries 3
I tested it a long ago with mpd-3.18. It worked at that time.
hth,
Ganbold
--
Boys will be boys, and so will a lot of middle-aged men. -- Kin Hubbard
_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
