Hello,
I've just setup my first MPD for establishing a PPTP tunnel with some
Windows clients...and I don't understand why it doesn't bind to my
interface IP to listen for incoming connections.
My config looks like this:
mpd.conf
startup:
set console open
set console ip 86.105.56.134
set console user skyraven test
default:
load pptp1
pptp1:
new -i ng0 pptp1 pptp1
set iface disable on-demand
set iface enable proxy-arp
set iface idle 0
set iface enable tcpmssfix
set bundle enable multilink
set link yes acfcomp protocomp
set link no pap chap
set link enable chap
set link keep-alive 10 60
set ipcp yes vjcomp
set ipcp ranges 172.20.1.1/32 172.20.1.51/32
set ipcp dns 172.20.1.1
set ipcp nbns 172.20.1.1 172.20.1.8
set bundle enable compression
set ccp yes mppc
set ccp yes mpp-e40
set ccp yes mpp-e128
set ccp yes mpp-stateless
mpd.links
pptp1:
set link type pptp
set pptp sef my-public-ip-address
set pptp enable incoming
set pptp disable originate
After starting mpd I get no errors, I have the netgraph modules loaded
but nothing is listening on tcp port 1723 for pptp (and the socket isn't
already in use).
Any ideas what I might be doing wrong ? (sorry for being just a newb here)
I don't know if this is the right list to ask or if it would be better
to direct this to freebsd-questions.
Sorry.
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
