> The motherboard of my HP proliant DL360 G4p was changed and now I > cannot see my network cards (BCM5704 netXtreme dual gigabit). I'm > running FreeBSD 6.2 p5... > > Here is what I have in dmsg > > bge0: <Broadcom BCM5704 B0, ASIC rev. 0x2100> mem > 0xfdef0000-0xfdefffff > irq 25 at device 2.0 on pci2 > bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfdef0000 > bge0: firmware handshake timed out > bge0: RX CPU self-diagnostics failed! > bge0: chip initialization failed
The NVRAM attached to the 5704 is likely bad, blank, or not programmed correctly. Check with HP support if they have any tools for testing/programming the 5704 (usually called b57udiag or q57udiag) otherwise you probably need to get the board replaced again. Dave _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "[EMAIL PROTECTED]"