On Wed, Aug 26, 2009 at 12:48:56PM +0300, Eugene Perevyazko wrote: > On Wed, Aug 26, 2009 at 12:39:16PM +0300, Eugene Perevyazko wrote: > > On Tue, Aug 25, 2009 at 11:25:53AM -0700, Pyun YongHyeon wrote: > > > > > > Try attached patch and let me know how it goes on your box. > > > You can see statistics counters maintained in driver with sysctl. > > > "sysctl dev.msk.0.stats" will show some numbers if it can see > > > packets on wire. > > > > With attached patch NIC doesn't see link again. > > All counters in dev.msk.0.stats are 0s. > > > > At the same time the link led on NIC is on, and switch shows that port is up. > That's different from the unpatched system, where led was off and switch port > was down. >
Any chances to get that NIC working? I tried to look at linux driver for it (sk98lin) but quickly got lost - it's about 700 lines only for SkGmInitPhyMarv() - Initialize the Marvell PHY registers And hw programming is definitely not my expertise :( -- Eugene Perevyazko _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"