It will work on 8 RELEASE just fine except for a macro define that ALTQ required that's not in RELEASE, what I did was stick the define into the header and all was well. I was thinking that I would not check that change in but I now see it will probably be useful to have it in the mainstream. I have another hot issue this morning but I will try and check the change into HEAD this afternoon then you will able to just pull that and the driver will drop into 8 REL with no problem.
Jack On Wed, May 19, 2010 at 9:20 AM, Robin Sommer <ro...@icir.org> wrote: > > On Tue, May 18, 2010 at 22:28 -0700, you wrote: > > > Yes, download the latest code, oh hmmm, can you install STABLE, > > because there's one small issue that will cause a problem on 8 REL, > > but if that's a big problem I can also give you a patch so it will work. > > Jack, thanks for the reply. I could upgrade to STABLE but I as I > have quite a number of machines in my setup (and not not all of them > need the driver) I would prefer to stay with RELEASE if that is an > option. So if you could send me a patch, that would be very helpful. > > > What I'd like to see you try is the newest code that I checked into > > HEAD today, that's what I am planning for 8.1 and I want as much > > testing as I can get anyway. > > Sure, I'd be happy to try that. Can this be back-ported to RELEASE > as well or does it need HEAD? > > Thanks! > > Robin > > -- > Robin Sommer * Phone +1 (510) 666-2886 * ro...@icir.org > ICSI/LBNL * Fax +1 (510) 666-2956 * www.icir.org > _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"