Hello, Pyun.
Вы писали 29 октября 2010 г., 21:17:45:
PY> On Fri, Oct 29, 2010 at 10:20:10AM +0300, ?????????????? ??????????????
wrote:
>> Hi, Freebsd-net.
>>
>> serv1# ifocnfig nfe0
>> nfe0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0
>> mtu 1500
>> options=10b<RXCSUM,TXCSUM,VLAN_MTU,TSO4>
>> ether 00:13:d4:ce:82:16
>> inet 10.11.8.17 netmask 0xfffffc00 broadcast 10.11.11.255
>> inet 10.11.8.15 netmask 0xfffffc00 broadcast 10.11.11.255
>> media: Ethernet autoselect (1000baseTX <full-duplex>)
>> status: active
>> serv1# ifconfig igb0
>> igb0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
>> options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4>
>> ether 00:1b:21:45:da:b8
>> media: Ethernet autoselect (1000baseTX <full-duplex>)
>> status: active
>> serv1# ifconfig vlan7
>> vlan7: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
>> options=3<RXCSUM,TXCSUM>
>> ether 00:1b:21:45:da:b8
>> inet 10.11.15.15 netmask 0xffffff00 broadcast 10.11.15.255
>> inet 10.11.7.1 netmask 0xffffff00 broadcast 10.11.7.255
>> media: Ethernet autoselect (1000baseTX <full-duplex>)
>> status: active
>> vlan: 7 parent interface: igb0
>>
>> doing bw test with iperf it show low performance on nfe0.
>>
>> # iperf -c 10.11.8.17
>> ------------------------------------------------------------
>> Client connecting to 10.11.8.17, TCP port 5001
>> TCP window size: 32.5 KByte (default)
>> ------------------------------------------------------------
>> [ 3] local 10.11.8.16 port 63911 connected with 10.11.8.17 port 5001
>> [ ID] Interval Transfer Bandwidth
>> [ 3] 0.0-10.5 sec 124 MBytes 98.8 Mbits/sec
>> # iperf -c 10.11.7.1
>> ------------------------------------------------------------
>> Client connecting to 10.11.7.1, TCP port 5001
>> TCP window size: 32.5 KByte (default)
>> ------------------------------------------------------------
>> [ 3] local 10.11.7.2 port 61422 connected with 10.11.7.1 port 5001
>> [ ID] Interval Transfer Bandwidth
>> [ 3] 0.0-10.3 sec 800 MBytes 653 Mbits/sec
>>
>> despite on it is integrated I expect about 300-400Mbit throughput
>> does nfe0 really so poor NIC?
PY> nfe(4) controllers would not be one of best controllers targeted
PY> for server environments but generally it's not poor for desktop
PY> users. I mean you should be able to saturate link when you use bulk
PY> TCP/UDP transfers.
PY> Last time I tried iperf it was not reliable. Did you disable
PY> threading of iperf? Also note, both sender/receiver of iperf should
PY> be built with same configuration option.
igb and nfe on same machine.
--------------\igb 10.11.7.1
CLIENT/ SERVER
\--------------/nfe 10.11.8.17
--
С уважением,
Коньков mailto:kes-...@yandex.ru
_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
