On Tuesday 16 November 2010 01:36:05 Pyun YongHyeon wrote: > Could you show me dmesg output? > I've attached a blind patch which could be related with > suspend/resume. I guess powering down code was not synchronized > well for newer controllers.
The patch didn't change anything unfortunately. The possibly relevant dmesg output is: pci9: <ACPI PCI bus> on pcib2 mskc0: <Marvell Yukon 88E8040 Fast Ethernet> port 0xde00-0xdeff mem 0xf1ffc000-0xf1ffffff irq 16 at device 0.0 on pci9 msk0: <Marvell Technology Group Ltd. Yukon FE+ Id 0xb8 Rev 0x00> on mskc0 msk0: disabling jumbo frame support msk0: Ethernet address: 00:23:ae:11:a0:15 miibus0: <MII bus> on msk0 e1000phy0: <Marvell 88E3016 10/100 Fast Ethernet PHY> PHY 0 on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow pcib3: <ACPI PCI-PCI bridge> at device 28.1 on pci0 pci11: <ACPI PCI bus> on pcib3 pci11: <network> at device 0.0 (no driver attached) pcib4: <ACPI PCI-PCI bridge> at device 28.4 on pci0 pci12: <ACPI PCI bus> on pcib4 mskc1: <Marvell Yukon 88E8053 Gigabit Ethernet> port 0xce00-0xceff mem 0xf1cfc000-0xf1cfffff irq 16 at device 0.0 on pci12 msk1: <Marvell Technology Group Ltd. Yukon EC Id 0xb6 Rev 0x02> on mskc1 msk1: Ethernet address: 00:50:43:00:3f:4f miibus1: <MII bus> on msk1 e1000phy1: <Marvell 88E1111 Gigabit PHY> PHY 0 on miibus1 e1000phy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow msk0 is the built-in port - I know it's one of the buggy 0x00 revisions. The rest of the dmesg can be found at http://www.cran.org.uk/~brucec/freebsd/dmesg_m1530.txt . -- Bruce Cran _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
