Hi all,
the same problem i wrote in the first posts about year ago :(
onboard re(4) tremendous flapping
while ( cable connects nic and switch )
{
re0: link state changed to UP
re0: link state changed to DOWN
}
here the details:
dmidecode
Base Board Information
Manufacturer: ASUSTeK Computer INC.
Product Name: AT5NM10-I
Version: Rev x.0x
Serial Number: MT7006K15200322
uname -a
FreeBSD 8.2-PRERELEASE amd64
system was cvsup-ed 2011.01.20
if_re.c,v 1.160.2.17 2011/01/15 00:32:15 yongari
dmesg
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0: 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX,
100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX,
1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto,
auto-flow
re0: Ethernet address: 20:cf:30:89:5e:95
re0: [FILTER]
pciconf -lv
re0@pci0:2:0:0: class=0x020000 card=0x83a31043 chip=0x816810ec rev=0x03 hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'Gigabit Ethernet NIC(NDIS 6.0) (RTL8168/8111/8111c)'
class = network
subclass = ethernet
flapping starts with cable pluging to the nic and to the switch, even without
ip assignment
switch used is TP-LINK TL-SG5426
the problem persists already about year and the only solution is to use
external nic ...
any idea/news?
--
Zeus V. Panchenko
IT Dpt., IBS ltd GMT+2 (EET)
_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
