On Fri, Feb 24, 2012 at 11:40 AM, YongHyeon PYUN <pyu...@gmail.com> wrote:
> On Thu, Feb 23, 2012 at 04:57:27AM +0700, Nugroho Atmotaruno wrote:
>> Hi all,
>>
>> I'm using FBSD 9.0-RELEASE with TPLink TG-3268 (rl8169) flapping
>> (UP/DOWN every several seconds).
>>
>> [nugroho@xtreme ~]$ uname -a
>> FreeBSD xtreme.arc.itb.ac.id 9.0-RELEASE FreeBSD 9.0-RELEASE #0: Tue
>> Jan?? 3 07:46:30 UTC 2012
>> r...@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC?? amd64
>>
>> [root@xtreme ~]# tail /var/log/messages
>> Feb 23 04:47:05 xtreme kernel: re0: link state changed to UP
>> Feb 23 04:47:07 xtreme kernel: re0: link state changed to DOWN
>> Feb 23 04:47:10 xtreme kernel: re0: link state changed to UP
>> Feb 23 04:47:16 xtreme kernel: re0: link state changed to DOWN
>> Feb 23 04:47:19 xtreme kernel: re0: link state changed to UP
>> Feb 23 04:47:20 xtreme kernel: re0: link state changed to DOWN
>> Feb 23 04:47:23 xtreme kernel: re0: link state changed to UP
>> Feb 23 04:48:44 xtreme kernel: re0: link state changed to DOWN
>> Feb 23 04:48:47 xtreme kernel: re0: link state changed to UP
>>
>>
>> [root@xtreme ~]# pciconf -lcv
>> re0@pci0:2:5:0: class=0x020000 card=0x816910ec chip=0x816910ec rev=0x10 
>> hdr=0x00
>>     vendor     = 'Realtek Semiconductor Co., Ltd.'
>>     device     = 'RTL-8169 Gigabit Ethernet'
>>     class      = network
>>     subclass   = ethernet
>>     cap 01[dc] = powerspec 2  supports D0 D1 D2 D3  current D0
>>
>> [root@xtreme ~]# devinfo -rv | grep rg
>>                 rgephy0 pnpinfo oui=0xe04c model=0x11 rev=0x3 at phyno=1
>>
>> [root@xtreme ~]# ifconfig re0
>> re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
>>         
>> options=389b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC>
>>         ether f8:d1:11:04:15:d6
>>         inet 167.205.3.4 netmask 0xffffff80 broadcast 167.205.3.127
>>         inet6 fe80::fad1:11ff:fe04:15d6%re0 prefixlen 64 scopeid 0x7
>>         inet6 2403:8000:1:1880::4 prefixlen 64
>>         nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
>>         media: Ethernet autoselect (1000baseT <full-duplex>)
>>         status: active
>>
>
> Would you try attached patch?

Thanks for your reply, I'll try it tomorrow.


-- 
Regards,


Nugroho
_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"

Reply via email to