[Added yougari@ and davidch@ to the To:/Cc: list] I confirmed that my issue reported on -current@ is due to the bxe(4) driver (BCM57711). If it is disabled, shutdown works fine without NMI.
Also, I received several reports about the same box that NMI occurred even on bge(4) (BCM5717) driver when probing during power-cycle test. The probability was about once per 30 power-cycles. Once it occurred, an AC on/off cycle was required (resetting a system reproduced the NMI in the same timing). Sean Bruno <sean_br...@yahoo.com> wrote in <1375208841.1496.3.camel@localhost>: se> se> se> > http://svnweb.freebsd.org/base?view=revision&revision=236216 se> > se> > se> se> se> Ok, confirmed after ~50 reboots. se> se> There is a timing problem in this revision that I don't fully se> understand. Adding printf's inside bce_reset() will cause the existing se> code to succeed, and sometimes the existing code in this revision will se> work (about 10% of the time). se> se> In the failure mode, the network interface, bce0, will not come up into se> service *without* and network restart, after which it works fine. se> se> I suspect that we are missing a DELAY or UDELAY somewhere in the se> restoral of the emac_status settings that needs to be implemented. se> se> Sean se> se> p.s. sorry for the late report as the commit is well over a year old.
pgpZQYE1ILK56.pgp
Description: PGP signature