> On 24 Aug 2015, at 02:02, Rick Macklem <rmack...@uoguelph.ca> wrote: > > Daniel Braniss wrote: >> >>> On 22 Aug 2015, at 14:59, Rick Macklem <rmack...@uoguelph.ca> wrote: >>> >>> Daniel Braniss wrote: >>>> >>>>> On Aug 22, 2015, at 12:46 AM, Rick Macklem <rmack...@uoguelph.ca> wrote: >>>>> >>>>> Yonghyeon PYUN wrote: >>>>>> On Wed, Aug 19, 2015 at 09:00:35AM -0400, Rick Macklem wrote: >>>>>>> Hans Petter Selasky wrote: >>>>>>>> On 08/19/15 09:42, Yonghyeon PYUN wrote: >>>>>>>>> On Wed, Aug 19, 2015 at 09:00:52AM +0200, Hans Petter Selasky wrote: >>>>>>>>>> On 08/18/15 23:54, Rick Macklem wrote: >>>>>>>>>>> Ouch! Yes, I now see that the code that counts the # of mbufs is >>>>>>>>>>> before >>>>>>>>>>> the >>>>>>>>>>> code that adds the tcp/ip header mbuf. >>>>>>>>>>> >>>>>>>>>>> In my opinion, this should be fixed by setting if_hw_tsomaxsegcount >>>>>>>>>>> to >>>>>>>>>>> whatever >>>>>>>>>>> the driver provides - 1. It is not the driver's responsibility to >>>>>>>>>>> know if >>>>>>>>>>> a tcp/ip >>>>>>>>>>> header mbuf will be added and is a lot less confusing that >>>>>>>>>>> expecting >>>>>>>>>>> the >>>>>>>>>>> driver >>>>>>>>>>> author to know to subtract one. (I had mistakenly thought that >>>>>>>>>>> tcp_output() had >>>>>>>>>>> added the tc/ip header mbuf before the loop that counts mbufs in >>>>>>>>>>> the >>>>>>>>>>> list. >>>>>>>>>>> Btw, >>>>>>>>>>> this tcp/ip header mbuf also has leading space for the MAC layer >>>>>>>>>>> header.) >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Hi Rick, >>>>>>>>>> >>>>>>>>>> Your question is good. With the Mellanox hardware we have separate >>>>>>>>>> so-called inline data space for the TCP/IP headers, so if the TCP >>>>>>>>>> stack >>>>>>>>>> subtracts something, then we would need to add something to the >>>>>>>>>> limit, >>>>>>>>>> because then the scatter gather list is only used for the data part. >>>>>>>>>> >>>>>>>>> >>>>>>>>> I think all drivers in tree don't subtract 1 for >>>>>>>>> if_hw_tsomaxsegcount. Probably touching Mellanox driver would be >>>>>>>>> simpler than fixing all other drivers in tree. >>>>>>>>> >>>>>>>>>> Maybe it can be controlled by some kind of flag, if all the three >>>>>>>>>> TSO >>>>>>>>>> limits should include the TCP/IP/ethernet headers too. I'm pretty >>>>>>>>>> sure >>>>>>>>>> we want both versions. >>>>>>>>>> >>>>>>>>> >>>>>>>>> Hmm, I'm afraid it's already complex. Drivers have to tell almost >>>>>>>>> the same information to both bus_dma(9) and network stack. >>>>>>>> >>>>>>>> Don't forget that not all drivers in the tree set the TSO limits >>>>>>>> before >>>>>>>> if_attach(), so possibly the subtraction of one TSO fragment needs to >>>>>>>> go >>>>>>>> into ip_output() .... >>>>>>>> >>>>>>> Ok, I realized that some drivers may not know the answers before >>>>>>> ether_ifattach(), >>>>>>> due to the way they are configured/written (I saw the use of >>>>>>> if_hw_tsomax_update() >>>>>>> in the patch). >>>>>> >>>>>> I was not able to find an interface that configures TSO parameters >>>>>> after if_t conversion. I'm under the impression >>>>>> if_hw_tsomax_update() is not designed to use this way. Probably we >>>>>> need a better one?(CCed to Gleb). >>>>>> >>>>>>> >>>>>>> If it is subtracted as a part of the assignment to if_hw_tsomaxsegcount >>>>>>> in >>>>>>> tcp_output() >>>>>>> at line#791 in tcp_output() like the following, I don't think it should >>>>>>> matter if the >>>>>>> values are set before ether_ifattach()? >>>>>>> /* >>>>>>> * Subtract 1 for the tcp/ip header mbuf that >>>>>>> * will be prepended to the mbuf chain in this >>>>>>> * function in the code below this block. >>>>>>> */ >>>>>>> if_hw_tsomaxsegcount = tp->t_tsomaxsegcount - 1; >>>>>>> >>>>>>> I don't have a good solution for the case where a driver doesn't plan >>>>>>> on >>>>>>> using the >>>>>>> tcp/ip header provided by tcp_output() except to say the driver can add >>>>>>> one >>>>>>> to the >>>>>>> setting to compensate for that (and if they fail to do so, it still >>>>>>> works, >>>>>>> although >>>>>>> somewhat suboptimally). When I now read the comment in sys/net/if_var.h >>>>>>> it >>>>>>> is clear >>>>>>> what it means, but for some reason I didn't read it that way before? (I >>>>>>> think it was >>>>>>> the part that said the driver didn't have to subtract for the headers >>>>>>> that >>>>>>> confused me?) >>>>>>> In any case, we need to try and come up with a clear definition of what >>>>>>> they need to >>>>>>> be set to. >>>>>>> >>>>>>> I can now think of two ways to deal with this: >>>>>>> 1 - Leave tcp_output() as is, but provide a macro for the device driver >>>>>>> authors to use >>>>>>> that sets if_hw_tsomaxsegcount with a flag for "driver uses tcp/ip >>>>>>> header mbuf", >>>>>>> documenting that this flag should normally be true. >>>>>>> OR >>>>>>> 2 - Change tcp_output() as above, noting that this is a workaround for >>>>>>> confusion w.r.t. >>>>>>> whether or not if_hw_tsomaxsegcount should include the tcp/ip header >>>>>>> mbuf and >>>>>>> update the comment in if_var.h to reflect this. Then drivers that >>>>>>> don't >>>>>>> use the >>>>>>> tcp/ip header mbuf can increase their value for if_hw_tsomaxsegcount >>>>>>> by >>>>>>> 1. >>>>>>> (The comment should also mention that a value of 35 or greater is >>>>>>> much >>>>>>> preferred to >>>>>>> 32 if the hardware will support that.) >>>>>>> >>>>>> >>>>>> Both works for me. My preference is 2 just because it's very >>>>>> common for most drivers that use tcp/ip header mbuf. >>>>> Thanks for this comment. I tend to agree, both for the reason you state >>>>> and >>>>> also >>>>> because the patch is simple enough that it might qualify as an errata for >>>>> 10.2. >>>>> >>>>> I am hoping Daniel Braniss will be able to test the patch and let us know >>>>> if it >>>>> improves performance with TSO enabled? >>>> >>>> send me the patch and I’ll test it ASAP. >>>> danny >>>> >>> Patch is attached. The one for head will also include an update to the >>> comment >>> in sys/net/if_var.h, but that isn't needed for testing. >> >> >> well, the plot thickens. >> >> Yesterday, before running the new kernel, I decided to re run my test, and to >> my surprise >> i was getting good numbers, about 300MGB/s with and without TSO. >> >> this morning, the numbers were again bad, around 70MGB/s,what the ^%$#@! >> >> so, after some coffee, I run some more tests, and some conclusions: >> using a netapp(*) as the nfs client: >> - doing >> ifconfig ix0 tso or -tso >> does some magic and numbers are back to normal - for a while >> >> using another Fbsd/zfs as client all is nifty, actually a bit faster than the >> netapp (not a fair >> comparison, since the zfs client is not heavily used) and I can’t see any >> degradation. >> > I assume you meant "server" and not "client" above. you are correct.
> >> btw, this is with the patch applied, but was seeing similar numbers before >> the patch. >> >> running with tso, initially I get around 300MGB/s, but after a while(sorry >> can’t be more scientific) >> it drops down to about half, and finally to a pathetic 70MGB/s >> > Ok, so it sounds like tso isn't the issue. (At least it seems the patch, > which I believe is needed, doesn't cause a regression.) > > All I can suggest is: > - looking at the ix stats (I know nothing about them), but if you post them > maybe someone conversant with the chip can help? (Before and after > degredation.) > - if you captured packets for a short period of time when degraded and then > after doing "ifconfig", looking at the packet capture in wireshark might give > some indication of what changes? > - For this I'd be focused on the TCP layer (window sizes, etc) and timing of > packets. > --> I don't know if there is a packet capture tool like tcpdump on a Netapp, > but > that might be better than capturing them on the client, in case tcpdump > affects > the outcome. However, tcpdump run on the client would be a fallback, I > think. > > The other thing is the degradation seems to cut the rate by about half each > time. > 300-->150-->70 I have no idea if this helps to explain it. > the halving is an optical illusion, it starts degrading slowly. actually it’s bad after reboot, fiddling with the two flags shows the above ‘fetaure’. one conclusion so far: ix0 behaves much better without TSO when the server is a NetAPP BTW, this thread started because next week, our main NetAPP will be upgraded, and I wanted to see if there will be any improvement. > Have fun with it, rick love your generosity ;-) cheers, and thanks, danny > >> *: while running the tests I monitored the Netapp, and nothing out of the >> ordinary there. >> >> cheers, >> danny >> >> _______________________________________________ >> freebsd-sta...@freebsd.org <mailto:freebsd-sta...@freebsd.org> mailing list >> https://lists.freebsd.org/mailman/listinfo/freebsd-stable >> <https://lists.freebsd.org/mailman/listinfo/freebsd-stable> >> To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org >> <mailto:freebsd-stable-unsubscr...@freebsd.org>" _______________________________________________ freebsd-net@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"