Kristof Provost je 02. 10. 2015 ob 12:08 napisal:
> Hi,
> 
> I've found a little time to look at the pf TSO issue (which made pf
> unusable on Xen VMs, like Amazon EC2).
> 
> I've posted the patch here:
> https://reviews.freebsd.org/D3779
> [...]

Thank you for your patch.

I have a similar problem but using ipfw. My issue is described in detail
in the attached message. You thing it is the same case?

Thank you in advance for your reply.
--- Begin Message ---
Hello,

I have a weird network problem which I believe may be caused by the
FreeBSD igb driver or perhaps even the network adapter.

Let me try to explain the scenario in brief:
I have a FreeBSD 10.0-RELEASE-p10  server with a public IP address, in
which N virtual machines are installed through JAIL; the machines hold
private IP addresses on the loopback1 adapter. The VMs access the
internet through NATting on the public IP via ipfw:

nat 1 config ip X.Y.Z.W if igb0 unreg_only same_ports

add 60000 nat 1 ip from 192.168.250.0/24 to any out xmit igb0 keep-state
add 60001 nat 1 ip from any to X.Y.Z.W in recv igb0

In addition, port forwarding is configured on the real machine towards
the VMs in order to support public services (Apache httpd, database, etc.)

The network adapter is:
igb0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500

options=403bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,VLAN_HWTSO>
        ether 00:45:80:dd:32:30
        inet X.Y.Z.W netmask 0xffffff00 broadcast X.Y.Z.W
        inet6 XX::YY:ZZ:WWW:VVV%igb0 prefixlen 64 scopeid 0x1
        inet6 XX:YY:ZZ:WWW::1 prefixlen 64
        nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
        media: Ethernet autoselect (1000baseT <full-duplex>)
        status: active

The loopback1 adapter, where the VMs' IPs are assigned, too, has MTU 1500.

So far so good, in the sense that everything works as expected, almost.
Occasionally there are requests originated by the VMs towards internet
servers which end in timeout (http, sftp, etc.). The very same requests,
if executed by the real machine, end correctly with a response.
After countless experiments I have managed to reproduce the problem
deterministically.

Through a tcpdump executed on the request's recipient I have noticed
that all TCP packets with a payload between 101 e 106  (inclusive)
bytes in size arrive with a wrong TCP checksum and as such are rejected.
Subsequent retransmissions of the same packet continue to bear a wrong
checksum
and this continues until the connection timeout is reached. The IP
checksum, instead, is always correct. Packets smaller than 101 bytes are
transmitted and received with the correct checksum, as the same happens
to packets with a payload in excess of 116 bytes in size.

If TXCSUM is disabled, the problem disappears.

The same problem I have on second server with same configuration and
hardware bat with FreeBSD 10.0-RELEASE-p1 .

I believe the above behavior is something error with the driver, as on
a third machine, with identical configuration with jail machines NATting
but with an em driver, the checksum problem didn't appear.

-- 
Cordiali saluti
Sossi Andrej
-------------------------
DOTCOM Information technology

Via Machiavelli, 28
34132 - Trieste (TS)
Italy

tel: +39 040 9828090
fax: +39 040 0641954
E-mail: aso...@dotcom.ts.it
----------------------------

Ai sensi del D.lgs n. 196 del 30.06.03 (Codice Privacy) si precisa che
le informazioni contenute in questo messaggio sono riservate e ad uso
esclusivo del destinatario. Qualora il messaggio in parola Le fosse
pervenuto per errore, La preghiamo di eliminarlo senza copiarlo e di non
inoltrarlo a terzi, dandocene gentilmente comunicazione. Grazie

This message, for the D.lgs n. 196 / 30.06.03 (Privacy Code), may
contain confidential and/or privileged information. If you are not the
addressee or authorized to receive this for the addressee, you must not
use, copy, disclose or take any action based on this message or any
information herein. If you have received this message in error, please
advise the sender immediately by reply e-mail and delete this message.
Thank you for your cooperation.

--- End Message ---
_______________________________________________
freebsd-net@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"

Reply via email to