I have a Chelsio T520 NIC that I have been trying to get netmap working with. I see reference to the ncxl# vs cxl# interface on the lists, but I never see ncxl come up. The man pages dont say anything about having to specifically enable anything that I can see. I am using RELENG11 as of today (r314848).
---Mike t5nex0@pci0:2:0:4: class=0x020000 card=0x00001425 chip=0x54071425 rev=0x00 hdr=0x00 vendor = 'Chelsio Communications Inc' device = 'T520-SO Unified Wire Ethernet Controller' class = network subclass = ethernet bar [10] = type Memory, range 64, base 0xdd300000, size 524288, enabled bar [18] = type Memory, range 64, base 0xdc000000, size 16777216, enabled bar [20] = type Memory, range 64, base 0xdd884000, size 8192, enabled cap 01[40] = powerspec 3 supports D0 D3 current D0 cap 05[50] = MSI supports 32 messages, 64 bit, vector masks cap 10[70] = PCI-Express 2 endpoint max data 256(2048) FLR RO NS link x8(x8) speed 8.0(8.0) cap 11[b0] = MSI-X supports 256 messages, enabled Table in map 0x20[0x0], PBA in map 0x20[0x1000] cap 03[d0] = VPD ecap 0001[100] = AER 2 0 fatal 0 non-fatal 1 corrected ecap 0003[170] = Serial 1 0000000000000000 ecap 000e[190] = ARI 1 ecap 0019[1a0] = PCIe Sec 1 lane errors 0 ecap 0010[1c0] = SR-IOV 1 IOV disabled, Memory Space disabled, ARI disabled 0 VFs configured out of 0 supported First VF RID Offset 0x0008, VF RID Stride 0x0004 VF Device ID 0x5807 Page Sizes: 4096 (enabled), 8192, 65536, 262144, 1048576, 4194304 ecap 0017[200] = TPH Requester 1 netmap seems to activate on the onboard igb NICs. # dmesg | grep -i netma netmap: loaded module igb0: netmap queues/slots: TX 4/1024, RX 4/1024 igb1: netmap queues/slots: TX 4/1024, RX 4/1024 # ifconfig cxl1 cxl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=ec07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWTSO,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> ether 00:07:43:39:9d:b8 inet 10.151.10.1 netmask 0xffffff00 broadcast 10.151.10.255 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet 10Gbase-Twinax <full-duplex> status: active plugged: SFP/SFP+/SFP28 Unknown (Copper pigtail) vendor: CISCO-TYCO PN: 1-2053783-2 SN: TED1605BGWC DATE: 2016-02-01 ---Mike -- ------------------- Mike Tancsa, tel +1 519 651 3400 Sentex Communications, m...@sentex.net Providing Internet services since 1994 www.sentex.net Cambridge, Ontario Canada http://www.tancsa.com/ _______________________________________________ freebsd-net@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"