Hi all, I have the problem, that I cannot reach more than 20-40Mbit/s when using the AX88179 chip (1Gbit/s NIC) on a USB 3.0 SuperSpeed Port (same on a 480Mbps High Speed USB v2.0-Port).
# usbconfig dump_device_desc (...) ugen0.7: <AX88179 ASIX Elec. Corp.> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=ON (124mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0300 bDeviceClass = 0x00ff <Vendor specific> bDeviceSubClass = 0x00ff bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0009 idVendor = 0x0b95 idProduct = 0x1790 bcdDevice = 0x0100 iManufacturer = 0x0001 <ASIX Elec. Corp.> iProduct = 0x0002 <AX88179> iSerialNumber = 0x0003 <00000000000001> bNumConfigurations = 0x0001 plugged into this USB controller: # dmesg | grep -i usb xhci0: <Intel BayTrail USB 3.0 controller> mem 0xd0800000-0xd080ffff irq 20 at device 20.0 on pci0 usbus0 on xhci0 ehci0: <Intel BayTrail USB 2.0 controller> mem 0xd0815000-0xd08153ff irq 23 at device 29.0 on pci0 usbus1: waiting for BIOS to give up control usbus1: timed out waiting for BIOS usbus1: EHCI version 1.0 usbus1 on ehci0 usbus0: 5.0Gbps Super Speed USB v3.0 usbus1: 480Mbps High Speed USB v2.0 ugen1.1: <Intel> at usbus1 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ugen0.1: <0x8086> at usbus0 uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ugen0.2: <Generic> at usbus0 umass0: <Generic USB Storage, class 0/0, rev 2.00/94.51, addr 1> on usbus0 ugen0.3: <vendor 0x05e3> at usbus0 uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/85.36, addr 2> on usbus0 ugen1.2: <vendor 0x8087> at usbus1 uhub3: <vendor 0x8087 product 0x07e6, class 9/0, rev 2.00/0.14, addr 2> on usbus1 ugen0.4: <pcasl> at usbus0 ukbd0: <PCASL Remot Control> on usbus0 uhid0: <PCASL Remot Control> on usbus0 ugen0.5: <vendor 0x05e3> at usbus0 uhub4: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/85.36, addr 4> on usbus0 ugen0.6: <vendor 0x0461> at usbus0 ukbd1: <vendor 0x0461 USB Wired Keyboard, class 0/0, rev 2.00/1.50, addr 5> on usbus0 uhid1: <vendor 0x0461 USB Wired Keyboard, class 0/0, rev 2.00/1.50, addr 5> on usbus0 ugen0.7: <ASIX Elec. Corp.> at usbus0 axge0: <NetworkInterface> on usbus0 ue0: <USB Ethernet> on axge0 # dmesg | grep -i axge axge0: <NetworkInterface> on usbus0 miibus2: <MII bus> on axge0 ue0: <USB Ethernet> on axge0 axge0: at uhub1, port 7, addr 6 (disconnected) axge0: <NetworkInterface> on usbus0 miibus2: <MII bus> on axge0 ue0: <USB Ethernet> on axge0 axge0: <NetworkInterface> on usbus0 miibus2: <MII bus> on axge0 ue0: <USB Ethernet> on axge0 I'm using FreeBSD 10.3-RELEASE-p19. Did someone of you ever managed to reach a higher bandwidth with axge driver and AX88179 chipset? Best regards -Tom
smime.p7s
Description: S/MIME cryptographic signature
