On 8/28/18 11:27 AM, Marius Halden wrote: > On Tue, Aug 28, 2018, at 20:06, Navdeep Parhar wrote: >> On 8/28/18 2:35 AM, Marius Halden wrote: >>> ... >>> media: Ethernet 1000baseSX <full-duplex,rxpause,txpause> >>> status: active >>> supported media: >>> media 1000baseSX mediaopt full-duplex,rxpause,txpause >>> media 1000baseSX mediaopt full-duplex,rxpause >>> media 1000baseSX mediaopt full-duplex,txpause >>> media 1000baseSX mediaopt full-duplex >>> plugged: SFP/SFP+/SFP28 1000BASE-LX (LC) >> >> This shows that the SFP+ is recognized properly and the link is up >> (active). Can you please provide the outputs of ifconfig and sysctl >> from when the system is in the problem state, when the link doesn't come up? > > This is from when it's in the problem state. According to ifconfig there is > link and everything looks fine to me, but it doesn't seem to pass any traffic > through the interface at all. >
Try passing some network traffic through the interface and look at before/after state of the MAC counters in sysctl dev.cxl.0.stats. Do you see the tx_frames/rx_frames counter move at all? Regards, Navdeep _______________________________________________ freebsd-net@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"