> On 2/15/19 5:28 PM, Johannes Lundberg wrote: > > Hey! > > > > I have a setup like described here: > > https://github.com/churchers/vm-bhyve/wiki/NAT-Configuration > > Bhyve guests use static IP addresses and everything works fine (i.e. > > guest can access host and internet). > > > > However, if I use lagg with failover for em0 and wlan0, and replace em0 > > with lagg0 in pf.conf the guests can not communicate with the host, or > > internet. The failover works fine for the host. I'm sure there has to be > > a way to get this to work... > > > > Is there anyone that can help? > > Found the problem! The command > > |# vm switch address public 192.168.8.1/24| > > |fixed it. vm-bhyve's command 'vm's help did not list this option as > available and therefor the confusion. It turns out the "vm" command's > help was outdated, not the wiki. Now my bhyve guests also work properly > during failover from ethernet to wifi :D I only setup the lagg in > rc.conf and let vm-bhyve handle all settings regarding the bridge, as > described in their wiki. > |
Would you be willing to either put up a wiki article on this, or work with Michael Dexter who would love to have this well documented in the wiki as it is a frequently asked for feature/setup. I have added him to the cc, dex...@freebsd.org. Thanks, -- Rod Grimes rgri...@freebsd.org _______________________________________________ freebsd-net@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
