On 15 May 2022, at 10:53, Benoit Chesneau wrote:
> Thanks but I have already set them to 1. This is kind of unexpected :/
>
> ```
> # sysctl net.inet.ip.forwarding
> net.inet.ip.forwarding: 1
> # sysctl net.link.tap.up_on_opennet.link.tap.up_on_open: 1
> ```
>
> in the vm, pinging the IP hosts are OK:
> ```
> # ifconfig vtnet0
> vtnet0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0
> mtu 1500
> options=80028<VLAN_MTU,JUMBO_MTU,LINKSTATE>
> ether 58:9c:fc:02:83:8a
> hwaddr 58:9c:fc:02:83:8a
> inet 10.1.0.2 netmask 0xffffff00 broadcast 10.1.0.255
> inet6 fe80::5a9c:fcff:fe02:838a%vtnet0 prefixlen 64 scopeid 0x1
> inet6 2a0e:e701:110b:102::3 prefixlen 64
> nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
> media: Ethernet 10Gbase-T <full-duplex> status: active
>
> # ping 10.1.0.1
> PING 10.1.0.1 (10.1.0.1): 56 data bytes
> 64 bytes from 10.1.0.1: icmp_seq=0 ttl=64 time=0.192 ms
> 64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=0.223 ms
> ^C
> --- 10.1.0.1 ping statistics ---
> 2 packets transmitted, 2 packets received, 0.0% packet loss
> round-trip min/avg/max/stddev = 0.192/0.208/0.223/0.015 ms
> # ping 10.2.0.11
> PING 10.2.0.11 (10.2.0.11): 56 data bytes
> 64 bytes from 10.2.0.11: icmp_seq=0 ttl=64 time=0.204 ms64 bytes from
> 10.2.0.11: icmp_seq=1 ttl=64 time=0.193 ms
>
> ```
>
> But pinging the default gateway of the host doesn't work
>
> ```
> ping -t5 10.2.0.1
> PING 10.2.0.1 (10.2.0.1): 56 data bytes
>
> --- 10.2.0.1 ping statistics ---5 packets transmitted, 0 packets received,
> 100.0% packet loss
> ```
>
> When I do a tcpdump on the tap0 interface on the Host I get the following
> result:
>
> ```
> # tcpdump -i tap0
> tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
> listening on tap0, link-type EN10MB (Ethernet), capture size 262144 bytes
> 17:35:21.210796 IP 10.1.0.2.6065 > vm91.jn-hebergement.com.https: Flags [S],
> seq 3549455562, win 65535, options [mss 1460,nop,wscale 6,sackOK,TS val
> 2252684480 ecr 0], length 0
> 17:35:23.347332 IP 10.1.0.2 > 10.2.0.1: ICMP echo request, id 5721, seq 0,
> length 64
> 17:35:24.348907 IP 10.1.0.2 > 10.2.0.1: ICMP echo request, id 5721, seq 1,
> length 64
> 17:35:24.410733 IP 10.1.0.2.6065 > vm91.jn-hebergement.com.https: Flags [S],
> seq 3549455562, win 65535, options [mss 1460,nop,wscale 6,sackOK,TS val
> 2252687680 ecr 0], length 0
> 17:35:25.350038 IP 10.1.0.2 > 10.2.0.1: ICMP echo request, id 5721, seq 2,
> length 64
> 17:35:26.351187 IP 10.1.0.2 > 10.2.0.1: ICMP echo request, id 5721, seq 3,
> length 64
> 17:35:27.352990 IP 10.1.0.2 > 10.2.0.1: ICMP echo request, id 5721, seq 4,
> length 64
> 17:35:27.611391 IP 10.1.0.2.6065 > vm91.jn-hebergement.com.https: Flags [S],
> seq 3549455562, win 65535, options [mss 1460,nop,wscale 6,sackOK,TS val
> 2252690881 ecr 0], length 0
> 17:35:30.811451 IP 10.1.0.2.6065 > vm91.jn-hebergement.com.https: Flags [S],
> seq 3549455562, win 65535, options [mss 1460,nop,wscale 6,sackOK,TS val
> 2252694080 ecr 0], length 0
> 17:35:30.998410 IP 10.1.0.2.1040 > 149.202.36.10.https: Flags [S], seq
> 496616510, win 65535, options [mss 1460,nop,wscale 6,sackOK,TS val 1054061401
> ecr 0], length 0
> ^C
> 10 packets captured
> 10 packets received by filter0 packets dropped by kernel
> ```
>
> Any idea what's going on ? could it be related to th bhyve options set by
> vm-bhyve starting a console ?
>
> ```
> May 15 17:55:25: [bhyve options: -c 1 -m 2G -Hwl
> bootrom,/usr/local/share/uefi-firmware/BHYVE_UEFI_CSM.fd -U
> ac3dafab-bedb-11ec-b24d-1402ec690a80 -u]
> May 15 17:55:25: [bhyve devices: -s 0,hostbridge -s 31,lpc -s
> 4:0,virtio-blk,/vms/utm/disk0.img -s
> 5:0,virtio-net,tap0,mac=58:9c:fc:07:c0:67 -s
> 5:1,virtio-net,tap2,mac=58:9c:fc:06:05:0c]
> ```
>
> Any suggestion is welcome,
Does 10.2.0.1 have a route back to the guest?
Mike
> ------- Original Message -------
> On Sunday, May 15th, 2022 at 14:47, Mario Marietto <marietto2...@gmail.com>
> wrote:
>
>> /etc/sysctl.conf :
>>
>> net.link.tap.up_on_open=1
>> net.inet.ip.forwarding=1
>>
>> Il giorno dom 15 mag 2022 alle ore 14:33 Benoit Chesneau
>> <beno...@enki-multimedia.eu> ha scritto:
>>
>>> My goal is to setup a p2p connection between the host and a guest vm and
>>> use the host as the nethop for the vm. I'm uskng bhyve for this setup:
>>>
>>> 1. on the host i create a tap tap0 interface and assign to it the IP
>>> 10.1.0,1
>>> 2. i create and start the vm using vm-bhyve.
>>> 3. in the vm I set the vtnet0 interface to 10.1.0.2 and set the default
>>> router to 10.1.0.1.
>>>
>>> i can ping the host but nothing up. When i run tcpdump on the host for this
>>> interface i can see the ping reply coming but it doesn't go to the guest.
>>> Any idea what's wrong? could it be related to the setup of the console port
>>> in bhyve? -l com1,stdio .
>>>
>>> Thoughts?
>>>
>>> Benoît
>>
>> --
>>
>> Mario.
