Zaphod Beeblebrox wrote:
On Feb 5, 2008 8:00 AM, Bc. Radek Krejca <[EMAIL PROTECTED]> wrote:
I have FreeBSD box as router
FreeBSD pvt-gw.starnet.cz 6.1-RELEASE-p12 FreeBSD 6.1-RELEASE-p12 #2: Wed
Jan 31 21:28:44 CET 2007 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/DL360-G4
i386
But speed is only about 382 Mbit. I have following values in
sysctl.conf:
net.inet.ip.fastforwarding=1
net.inet.tcp.recvspace=262144
net.inet.tcp.sendspace=262144
kern.ipc.maxsockbuf=33554432
The ip.fastforwarding makes a tiny insignificant difference with the caveat
that your box won't show up on traceroutes. Fast forwarding is "fast" by
virtue of the fact that it doesn't decrement TTL.
The other sysctl values effect traffic originating or termating at your
router --- they probably have no effect on performance.
I need about 600-700 Mbit. Is any chance on freebsd? Hardware is HP
DL360-G4, interrupt takes about 55 % of CPU. I tested it over
netperf and result is about 382 Mbit.
If you need large packet performance of 600-700 mbit (large in this case
being packets (on average) of 1000 bytes or more), then this hardware is
likely doable. I'd do the following:
- upgrade at least to 6.3. upgrading to 7.0 might also be better, depending
on hardware choices
- ensure your ethernet cards are on fast enough busses. 'em' (Intel Ether
Express 1000) flavor ports are my personal favorite
- enable polling (this will make a _huge_ difference by itself)
Let me disagree with this - while polling reduce CPU utilization it
doesn't perform better.
When the network is under pressure polling can lead to lost packets.
After all one should test how polling works for him, but with polling
enabled my intel network cards
does not work better.
- your hardware is (likely) dual core. Make sure every piece of hardware in
use doesn't involve any giant locks. Under 6.x consider the mpsafenet
sysctl. This is also a point on which 7.0 will shine.
_______________________________________________
freebsd-performance@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-performance
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
_______________________________________________
freebsd-performance@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-performance
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
