What kind of network cards are you using, and what bus type are they using?
>From my experience, I was never able to get over ~300Mbps routing from one PCI-X NIC to another PCI-X NIC. I switched out the bus to a PCI-Express and put a couple of Intel PCI-E 4x gigabit cards in and I was able to get over 950Mbps throughput. Sorry I don't have my sysctl.conf settings, that box was reallocated after we replaced it with some Cisco junk. -Chris On Tue, Feb 5, 2008 at 5:00 AM, Bc. Radek Krejca <[EMAIL PROTECTED]> wrote: > Hi, > > I have FreeBSD box as router > FreeBSD pvt-gw.starnet.cz 6.1-RELEASE-p12 FreeBSD 6.1-RELEASE-p12 #2: Wed > Jan 31 21:28:44 CET 2007 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/DL360-G4 > i386 > But speed is only about 382 Mbit. I have following values in > sysctl.conf: > > net.inet.ip.fastforwarding=1 > net.inet.tcp.recvspace=262144 > net.inet.tcp.sendspace=262144 > kern.ipc.maxsockbuf=33554432 > > I need about 600-700 Mbit. Is any chance on freebsd? Hardware is HP > DL360-G4, interrupt takes about 55 % of CPU. I tested it over > netperf and result is about 382 Mbit. > > > -- > Regards, > Bc. Radek Krejca > ICQ: 65895541 > > > _______________________________________________ > freebsd-performance@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-performance > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > _______________________________________________ freebsd-performance@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-performance To unsubscribe, send any mail to "[EMAIL PROTECTED]"
