I increased net.inet.icmp.icmplim to 2000 but this does not make any change. Here is my output
myserver# sysctl -a | grep net.inet.icmp.icmplim net.inet.icmp.icmplim: 2000 net.inet.icmp.icmplim_output: 1 After increasing inet.icmp.icmplim to 2000 and startign Squid, I don't get the errors below Feb 5 20:39:44 myserver /kernel: Limiting open port RST response from 247 to 200 packets per second Feb 5 20:39:44 myserver /kernel: Limiting open port RST response from 247 to 200 packets per second Feb 5 20:39:45 myserver /kernel: Limiting open port RST response from 239 to 200 packets per second But traffic still drops. Alex On Fri, Feb 6, 2009 at 3:19 PM, István Szukács <lecc...@gmail.com> wrote: > Hi! > > > l...@test:~$sysctl -a | grep net.inet.icmp.icmplim > net.inet.icmp.icmplim: 200 > net.inet.icmp.icmplim_output: 1 > > > Regards, > Istvan > > On Fri, Feb 6, 2009 at 2:44 PM, Alex Dehaini <alexdeha...@gmail.com>wrote: > >> Hi Guys, >> >> I have some issues with Squid on Freebsd. I am running FreeBSD release 4.9 >> and Squid version 2.5. >> >> I have setup FreeBSD as a bridge so that all traffic from my network can >> transparently pass through the FreeBSD server. I am running Squid on the >> same server and I created an ipfw rule to redirect port 80 to port 3128. >> >> Normally, when Squid is not started - we see traffic close to 30MB flowing >> through the server. Immediately I start squid, the traffic drops to half >> and >> sometimes lower and stays there. When this happens, I have a lot of >> clients >> that will call and complain they can't access the Internet. At the same >> time, I get these log messages >> >> *Feb 5 20:39:44 myserver /kernel: Limiting open port RST response from >> 247 >> to 200 packets per second >> Feb 5 20:39:44 myserver /kernel: Limiting open port RST response from 247 >> to 200 packets per second >> Feb 5 20:39:45 myserver /kernel: Limiting open port RST response from 239 >> to 200 packets per second >> Feb 5 20:39:45 myserver /kernel: Limiting open port RST response from 239 >> to 200 packets per second >> Feb 5 20:39:46 myserver /kernel: Limiting open port RST response from 273 >> to 200 packets per second >> Feb 5 20:39:46 myserver /kernel: Limiting open port RST response from 273 >> to 200 packets per second >> Feb 5 20:39:47 myserver /kernel: Limiting open port RST response from 228 >> to 200 packets per second >> Feb 5 20:39:47 myserver /kernel: Limiting open port RST response from 228 >> to 200 packets per second >> Feb 5 20:39:48 myserver /kernel: Limiting open port RST response from 225 >> to 200 packets per second >> Feb 5 20:39:48 myserver /kernel: Limiting open port RST response from 225 >> to 200 packets per second >> Feb 5 20:39:49 myserver /kernel: Limiting open port RST response from 244 >> to 200 packets per second >> Feb 5 20:39:49 myserver /kernel: Limiting open port RST response from 244 >> to 200 packets per second >> Feb 5 20:39:50 myserver /kernel: Limiting open port RST response from 259 >> to 200 packets per second >> Feb 5 20:39:50 myserver /kernel: Limiting open port RST response from 259 >> to 200 packets per second >> Feb 5 20:39:51 myserver /kernel: Limiting open port RST response from 234 >> to 200 packets per second >> Feb 5 20:39:51 myserver /kernel: Limiting open port RST response from 234 >> to 200 packets per second >> Feb 5 20:39:52 myserver /kernel: Limiting open port RST response from 243 >> to 200 packets per second >> Feb 5 20:39:52 myserver /kernel: Limiting open port RST response from 243 >> to 200 packets per second >> Feb 5 20:39:53 myserver /kernel: Limiting open port RST response from 218 >> to 200 packets per second >> Feb 5 20:39:53 myserver /kernel: Limiting open port RST response from 218 >> to 200 packets per second >> Feb 5 20:39:55 myserver /kernel: Limiting open port RST response from 233 >> to 200 packets per second >> Feb 5 20:39:55 myserver /kernel: Limiting open port RST response from 233 >> to 200 packets per second >> Feb 5 20:39:56 myserver /kernel: Limiting open port RST response from 241 >> to 200 packets per second >> Feb 5 20:39:56 myserver /kernel: Limiting open port RST response from 241 >> to 200 packets per second >> Feb 5 20:39:57 myserver /kernel: Limiting open port RST response from 220 >> to 200 packets per second >> Feb 5 20:39:57 myserver /kernel: Limiting open port RST response from 220 >> to 200 packets per second >> Feb 5 20:39:58 myserver /kernel: Limiting open port RST response from 206 >> to 200 packets per second >> Feb 5 20:39:58 myserver /kernel: Limiting open port RST response from 206 >> to 200 packets per second >> Feb 5 20:40:01 myserver /kernel: Limiting open port RST response from 223 >> to 200 packets per second >> Feb 5 20:40:01 myserver /kernel: Limiting open port RST response from 223 >> to 200 packets per second* >> >> When I stop Squid, everything returns to normal. Any idea what is causing >> this. I will appreciate any help. >> >> Thanks >> >> -- >> Alex Dehaini >> Developer >> Site - www.alexdehaini.com >> Email - alexdeha...@gmail.com >> _______________________________________________ >> freebsd-performance@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-performance >> To unsubscribe, send any mail to " >> freebsd-performance-unsubscr...@freebsd.org" >> > > > > -- > the sun shines for all > -- Alex Dehaini Developer Site - www.alexdehaini.com Email - alexdeha...@gmail.com _______________________________________________ freebsd-performance@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-performance To unsubscribe, send any mail to "freebsd-performance-unsubscr...@freebsd.org"
