On Fri, Jan 28, 2011 at 09:10:20AM -0800, Julian Elischer wrote: > On 1/28/11 8:15 AM, Stefan Lambrev wrote: > > The overhead comes from badly written software. > > This software is optimized for linux and you have to optimize it for > > freebsd, then you will have the same overhead. > > All those *popular* benchmarks like hping, iperf, netperf have some strange > > optimizations for linux - we call them linuxism. > > Just search the archives - I'm pretty sure patches are flying around. > > > He wants to know why the freeBSD driver spends 8 x as much time on > each interrupt.
Yes! > there are of course several possible answers, including: > > 1/ Sometimes BSD and Linux report things differently. Linux may or may not > account for the lowest level interrupt tie the same as BSD But I see only 20% idle on FreeBSD and 80% idle on Linux. > 2/ the BSD driver for that chip may be badly written, or may > be doing more or different work for some reason > 3/ the FreeBSD interrupt code may be misconfigured for that driver. > > or maybe combinations... > > there are profiling tools that you may decide to run. What tools I can use on amd64? I boot kernel configured with 'config -p'. Most time in spinlock_exit and acpi_cpu_c1. > > On Jan 28, 2011, at 6:10 PM, Slawa Olhovchenkov wrote: > > > >> On Fri, Jan 28, 2011 at 06:03:15PM +0200, Stefan Lambrev wrote: > >> > >>> Do the test with netblast ;) > >>> Most perf tools are written badly and for Linux. > >>> In our internal test netblast running on freebsd outperform everything > >>> else. > >> I don't speak about bad performance. > >> I speak about overhead. > >> > >> Linux: overhead 7% for 56K int/s > >> FreeBSD: overhead 59% for 14K int/s > >> > >> For processing 1/4 interrupts FreeBSD need 8x CPU. > >> > >>> P.S. - /usr/src/tools/tools/netrate/netblast - we have tested little more > >>> expensive card - em/igb and bce. > >>> > >>> On Jan 28, 2011, at 4:33 PM, Slawa Olhovchenkov wrote: > >>> > >>>> I test network performance and found some strange result -- on the > >>>> same hardware Linux more then 10x used CPU resources for interrupt > >>>> processing. > >>>> > >>>> FreeBSD system utilise 70% CPU (32% idle, 59% interrupt, 9% sys) and > >>>> network card generate 14K-18K interrupt per second. > >>>> > >>>> Linux system utilise 20% CPU (80% idle, 13% system, 3% hiq, 4% siq) > >>>> and network card generate 56K interrupt per second. > >>>> > >>>> I used 'netperf -H host -t UDP_STREAM -l 60 -C -c -- -m 8972 -s > >>>> 128K -S 128K' for generate network traffic. > >>>> > >>>> NIC: > >>>> > >>>> re0:<RealTek 8169SC/8110SC Single-chip Gigabit Ethernet> port > >>>> 0x4000-0x40ff mem 0xf0100000-0xf01000ff irq 19 at device 4.0 on pci11 > >>>> re0: Chip rev. 0x18000000 > >>>> re0: MAC rev. 0x00000000 > >>>> miibus0:<MII bus> on re0 > >>>> rgephy0:<RTL8169S/8110S/8211B media interface> PHY 1 on miibus0 > >>>> > >>>> > >>>> CPU: > >>>> > >>>> CPU: Intel(R) Celeron(R) CPU 420 @ 1.60GHz (1596.05-MHz > >>>> K8-class CPU) > >>>> Origin = "GenuineIntel" Id = 0x10661 Family = 6 Model = 16 > >>>> Stepping = 1 > >>>> Features=0xafebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> > >>>> Features2=0xe31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM> > >>>> AMD Features=0x20100800<SYSCALL,NX,LM> > >>>> AMD Features2=0x1<LAHF> > >>>> TSC: P-state invariant > >>>> > >>>> RAM: one DDR2-667 DIMM. > >>>> > >>>> OS: 8.2-RC2, amd64 > >>>> > >>>> _______________________________________________ > >>>> freebsd-performance@freebsd.org mailing list > >>>> http://lists.freebsd.org/mailman/listinfo/freebsd-performance > >>>> To unsubscribe, send any mail to > >>>> "freebsd-performance-unsubscr...@freebsd.org" > >>> -- > >>> Best Wishes, > >>> Stefan Lambrev > >>> ICQ# 24134177 > >>> > >>> > >>> > >>> > >>> > >>> _______________________________________________ > >>> freebsd-performance@freebsd.org mailing list > >>> http://lists.freebsd.org/mailman/listinfo/freebsd-performance > >>> To unsubscribe, send any mail to > >>> "freebsd-performance-unsubscr...@freebsd.org" > > -- > > Best Wishes, > > Stefan Lambrev > > ICQ# 24134177 > > > > > > > > > > > > _______________________________________________ > > freebsd-performance@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-performance > > To unsubscribe, send any mail to > > "freebsd-performance-unsubscr...@freebsd.org" > > > _______________________________________________ freebsd-performance@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-performance To unsubscribe, send any mail to "freebsd-performance-unsubscr...@freebsd.org"