I have done some more experiments and determined the NAT issue is a complete red herring.
It looks like the problem is the USB WiFi Dongle. It can receive at ~1 MB/s, but only push out at ~80 KB/s. I am in hostap mode so scping data into it works as expected but scp'ing data out of it does not. The primary two options are that I have configured the interface wrong or the driver has something going on in it. I plan on perusing freebsd-wireless and the Bugzilla for any indication. Perhaps, though, somewhere here has experienced a similar situation. The driver I am using: Mar 17 15:52:39 gizmo kernel: run0: <1.0> on usbus0 Mar 17 15:52:39 gizmo kernel: run0: MAC/BBP RT5390 (rev 0x0502), RF RT5370 (MIMO 1T1R), address 00:0f:60:03:b6:db Mar 17 15:52:39 gizmo kernel: ieee80211_load_module: load the wlan_amrr module by hand for now. Mar 17 15:52:39 gizmo kernel: wlan0: Ethernet address: 00:0f:60:03:b6:db Mar 17 15:52:39 gizmo kernel: run0: firmware RT3071 ver. 0.33 loaded /Malcolm _______________________________________________ freebsd-performance@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-performance To unsubscribe, send any mail to "freebsd-performance-unsubscr...@freebsd.org"
