Hideki Yamamoto on 12/10/2005 5:39 PM wrote:
I am trying the packect shaping by CBQ of altq on FBSD6 box. The box is configured as bridge by if_bridge kernel configuration. The target packet is UDP on IPv6. Though I wrote output port number of the udp packet on /etc/services and wrote CBQ shaping rule on /etc/pf.conf, the shaping rule about each port number are not applied to the packet, so only default rule are applied.
My question is: can pf especially altq work with bridge function? If so, which
bridge function, BRIDGE, if_bridge, ng_brige, is OK?
I am running if_bridge on FBSD 6.0 and have successfully run CBQ and
HFSC on the bridge ...
Do you have:
net.link.bridge.pfil_member=1 # enables packet filtering on in and out
interfaces
specified in /etc/sysctl.conf? It's quite possible this is necessary for ALTQ to access
the "out" on the $xx_if of the bridge ...
Keep in mind that if you use the queue on a "pass" rule, ALTQ will apply to the
"out" of that rule ...
HTH
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-pf
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
