On 8/21/07, Rene Ladan <[EMAIL PROTECTED]> wrote: > Ladan, R.C. schreef: > > [ Better discuss it via non-$REALJOB email address... ] > > > > Rene both tb's is from 19.08.07 with gcc 4.2.1, this build failed localy > > here build from 17.08 reproduct can you all with > > ports-mgmt/porttools and "port test". > > > I just did that (again, also when testing the update locally), it just builds > fine. > The log is at http://home.tiscali.nl/rladan/freebsd/port-test-sah527.bz2 > SIZE = 8322 > SHA256 = cf4e227af94b25187f0ba5d7f2682902c75e8f2a69a1400ca9ed8ee2e864edfb > > If you look at http://setiathome.berkeley.edu/results.php?userid=211311 > (could be down right now), you can see that the 5.27 client produces valid > results. > > I also looked for xmmintrin.h in /usr/src/ObsoleteFiles.inc but didn't find > anything > in there. > -- I am having problems building the 5.27 version from ports also. Please let me know if I can provide any additional information. I have pasted uname and dmesg below, I can get buildlog posted to my website tomorrow if that will help. Thanks, Kelly
%uname -a FreeBSD vorlon.jkhfamily.org 6.2-RELEASE-p6 FreeBSD 6.2-RELEASE-p6 #10: Sat Jul 28 21:56:57 CDT 2007 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC i386 %dmesg Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-RELEASE-p6 #10: Sat Jul 28 21:56:57 CDT 2007 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC ACPI APIC Table: <Nvidia AWRDACPI> Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 Processor 3000+ (1808.34-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x20ff0 Stepping = 0 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> Features2=0x1<SSE3> AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow> AMD Features2=0x1<LAHF> real memory = 1073676288 (1023 MB) avail memory = 1033289728 (985 MB) ioapic0 <Version 1.1> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <Nvidia AWRDACPI> on motherboard acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi0: Power Button (fixed) acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <memory> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 1.1 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xfebfa000-0xfebfafff irq 21 at device 2.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 10 ports with 10 removable, self powered ehci0: <NVIDIA nForce4 USB 2.0 controller> mem 0xfebf9000-0xfebf90ff irq 22 at device 2.1 on pci0 ehci0: [GIANT-LOCKED] usb1: EHCI version 1.0 usb1: companion controller, 4 ports each: usb0 usb1: <NVIDIA nForce4 USB 2.0 controller> on ehci0 usb1: USB revision 2.0 uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub1: 10 ports with 10 removable, self powered pcm0: <nVidia nForce4> port 0xcc00-0xccff,0xc800-0xc8ff mem 0xfebfc000-0xfebfcfff irq 23 at device 4.0 on pci0 pcm0: <Avance Logic ALC658 AC97 Codec> atapci0: <nVidia nForce CK804 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xd000-0xd00f at device 6.0 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 atapci1: <nVidia nForce CK804 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xd400-0xd40f mem 0xfebfd000-0xfebfdfff irq 21 at device 7.0 on pci0 ata2: <ATA channel 0> on atapci1 ata3: <ATA channel 1> on atapci1 atapci2: <nVidia nForce CK804 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xe800-0xe80f mem 0xfebfe000-0xfebfefff irq 22 at device 8.0 on pci0 ata4: <ATA channel 0> on atapci2 ata5: <ATA channel 1> on atapci2 pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0 pci5: <ACPI PCI bus> on pcib1 fwohci0: <Texas Instruments TSB43AB22/A> mem 0xfeaff000-0xfeaff7ff,0xfeaf8000-0xfeafbfff irq 19 at device 7.0 on pci5 fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:50:8d:00:00:d4:33:42 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:50:8d:d4:33:42 fwe0: Ethernet address: 02:50:8d:d4:33:42 fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) nve0: <NVIDIA nForce MCP9 Networking Adapter> port 0xfc00-0xfc07 mem 0xfebff000-0xfebfffff irq 23 at device 10.0 on pci0 nve0: Ethernet address 00:50:8d:49:b9:1e miibus0: <MII bus> on nve0 ciphy0: <Cicada CS8201 10/100/1000TX PHY> on miibus0 ciphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto nve0: Ethernet address: 00:50:8d:49:b9:1e pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0 pci4: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0 pci2: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0 pci1: <ACPI PCI bus> on pcib5 nvidia0: <GeForce 6200 TurboCache(TM)> mem 0xfc000000-0xfcffffff,0xb0000000-0xbfffffff,0xcf000000-0xcfffffff irq 18 at device 0.0 on pci1 nvidia0: [GIANT-LOCKED] fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xd0000-0xd3fff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ukbd0: Logitech USB Receiver, rev 1.10/17.21, addr 2, iclass 3/1 kbd2 at ukbd0 ums0: Logitech USB Receiver, rev 1.10/17.21, addr 2, iclass 3/1 ums0: 16 buttons and Z dir. Timecounter "TSC" frequency 1808342376 Hz quality 800 Timecounters tick every 1.000 msec acd0: DMA limited to UDMA33, device found non-ATA66 cable acd0: DVDR <AOPEN DUW1616/ARR/1000> at ata0-master UDMA33 ad2: 114473MB <Seagate ST3120026A 8.01> at ata1-master UDMA100 ad3: 38166MB <Seagate ST340014A 8.01> at ata1-slave UDMA100 cd0 at ata0 bus 0 target 0 lun 0 cd0: <AOPEN DUW1616/ARR 1000> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present Trying to mount root from ufs:/dev/ad2s1a bridge0: Ethernet address: 32:d0:0b:ac:51:98 % _______________________________________________ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "[EMAIL PROTECTED]"