Christian Hiris wrote:
On Saturday 30 August 2008, Sean Bruno wrote:
Christian Hiris wrote:
On Thursday 28 August 2008, Sean Bruno wrote:
I sent this over to the smartmontools mailing list, but thought I would
post it here in case anyone else has run into this:
Using smartmontools 5.38 under FreeBSD 6/7 doesn't seem to work with the
following card:
[EMAIL PROTECTED]:12:0: class=0x010400 card=0x100313c1 chip=0x100313c1 rev=0x00
hdr=0x00
vendor = '3ware
Inc.'
device = '9550SX/9590SE Series SATA2 Raid
Controller'
class = mass
storage
subclass = RAID
smartctl command output:
Source # smartctl -d3ware,0
/dev/da0
smartctl version 5.36 [i386-portbld-freebsd6.3] Copyright (C) 2002-6
Bruce Allen
Home page is
http://smartmontools.sourceforge.net/
Unrecognized escalade_type 4 in freebsd_3ware_command_interface(disk
0)
Please contact
[EMAIL PROTECTED]
Unrecognized escalade_type 4 in freebsd_3ware_command_interface(disk
0)
Please contact
[EMAIL PROTECTED]
Smartctl: Device Read Identity Failed (not an ATA/ATAPI
device)
A mandatory SMART command failed: exiting. To continue, add one or more
'-T per.
Source #
Try # smartctl -d3ware,0 /dev/twa0
^^^^
Works here with a 9500S-8 card on FreeBSD 7.0-STABLE.
Cheers,
ch
Hmmm ... that didn't seem to work for me:
Source # smartctl -d3ware,0 /dev/twa0
smartctl version 5.36 [i386-portbld-freebsd6.3] Copyright (C) 2002-6
Bruce Allen
Home page is http://smartmontools.sourceforge.net/
Command failed, ata.status=(0x00), ata.command=(0xec), ata.flags=(0x01)
WARNING - NO DEVICE FOUND ON 3WARE CONTROLLER (disk 0)
Smartctl: Device Read Identity Failed (not an ATA/ATAPI device)
A mandatory SMART command failed: exiting. To continue, add one or more
'-T permissive' options.
Source # uname -a
FreeBSD 6.4-PRERELEASE FreeBSD 6.4-PRERELEASE #0 r5811:5829: Thu Aug 28
11:01:38 PDT 2008
[EMAIL PROTECTED]:/home/sbruno/work/src/ankeny/src/FreeB
SD_RELENG6/sys/i386/compile/MIRALINK i386
Is there a HDD connected to port 0? I get something similar if I check on a
port w/o any disk attached to:
# smartctl -d3ware,7 /dev/twa0
smartctl version 5.38 [i386-portbld-freebsd7.0] Copyright (C) 2002-8 Bruce
Allen
Home page is http://smartmontools.sourceforge.net/
Command failed, ata.status=(0x03), ata.command=(0xec), ata.flags=(0x01)
WARNING - NO DEVICE FOUND ON 3WARE CONTROLLER (disk 7)
Smartctl: Device Read Identity Failed (not an ATA/ATAPI device)
A mandatory SMART command failed: exiting. To continue, add one or more '-T
permissive' options.
#
Btw, I run version 5.38.
Cheers,
ch
Ah ... thank you. My drives are 12, 13,14 and 15. By probing:
smartctl -d3ware,12 /dev/twa0
I now get good status from the drives. Thanks!
--
Sean Bruno
MiraLink Corporation
6015 NE 80th Ave, Ste 100
Portland, OR 97218
Cell 503-358-6832
Phone 503-621-5143
Fax 503-621-5199
MSN: [EMAIL PROTECTED]
Google: [EMAIL PROTECTED]
_______________________________________________
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
