On Fri, Jun 1, 2012 at 12:02 AM, Sergio de Almeida Lenzi <lenzi.ser...@gmail.com> wrote: > Em Qui, 2012-05-31 às 17:31 +0200, Leslie Jensen escreveu: > >> >> 2012-05-31 14:24, Robert Huff skrev: >> > >> > Leslie Jensen writes: >> > >> >> ----------------------------------------------------------------------- >> >> Oh dear - something failed during the build - sorry ! >> >> For more help with debugging build errors, please see the section in: >> >> http://wiki.documentfoundation.org/Development >> >> >> >> internal build errors: >> >> >> >> ERROR: error 65280 occurred while making >> >> /usr/ports/editors/libreoffice/work/libreoffice-core-3.5.2.2/vcl/prj >> >> >> >> it seems that the error is inside 'vcl', please re-run build >> >> inside this module to isolate the error and/or test your fix: >> >> ----------------------------------------------------------------------- >> >> >> >> /usr/local/bin/bash >> >> cd /usr/ports/editors/libreoffice/work/libreoffice-core-3.5.2.2 >> >> source ./Env.Host.sh >> >> cd vcl >> >> gmake clean # optional >> >> gmake -r >> >> >> >> when the problem is isolated and fixed exit and re-run 'make' from the >> >> top-level >> > >> > >> > Did you follow the instructions? >> > >> > >> > Robert Huff >> > >> > _______________________________________________ >> > freebsd-ports@freebsd.org mailing list >> > http://lists.freebsd.org/mailman/listinfo/freebsd-ports >> > To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org" >> >> >> >> After four manual procedures I'm getting stuck here. >> >> What can I do? >> >> -------------------------------------------------- >> [ build MOD ] writerperfect >> Bus error (core dumped) >> File tested,Test Result,Execution Time (ms) >> file:///usr/ports/editors/libreoffice/work/libreoffice-core-3.5.2.2/lotuswordpro/qa/cppunit/data/pass/A14.lwp,Signal >> 11 during cups initialization called, ignoring cups >> >> Error: a unit test failed, please do one of: >> >> export DEBUGCPPUNIT=TRUE # for exception catching >> export GDBCPPUNITTRACE="gdb --args" # for interactive debugging >> export VALGRIND=memcheck # for memory checking >> and retry. >> gmake[1]: *** >> [/usr/ports/editors/libreoffice/work/libreoffice-core-3.5.2.2/workdir/unxfbsd.pro/CppunitTest/lotuswordpro_test_lotuswordpro.test] >> Error 1 >> gmake[1]: *** Inväntar oavslutade jobb... >> TEMPFILE=/tmp/gbuild.XXXXXX.gNM6YJsj && mv ${TEMPFILE} >> /usr/ports/editors/libreoffice/work/libreoffice-core-3.5.2.2/workdir/unxfbsd.pro/LinkTarget/Library/writerfilter_uno.uno.so.objectlist >> gmake[1]: Lämnar katalogen >> "/usr/ports/editors/libreoffice/work/libreoffice-core-3.5.2.2/tail_build" >> gmake: *** [source-env-and-recurse] Error 2 >> ________________________________________________ >> >> _______________________________________________ >> freebsd-ports@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-ports >> To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org" > > there is an error in the lotuswordpro testing... if you are not going > to use lotuswrordpro.... > apply these patch at the > /usr/ports/editors/libreoffice/work/libreoffice-core-3.5.2.2 > > ================== > --- lotuswordpro/Module_lotuswordpro.mk.orig 2012-05-31 > 19:34:52.014043605 -0300 > +++ lotuswordpro/Module_lotuswordpro.mk 2012-05-31 19:29:29.276164732 > -0300 > @@ -31,8 +31,8 @@ > Library_lwpft \ > )) > > -$(eval $(call gb_Module_add_check_targets,lotuswordpro,\ > - CppunitTest_lotuswordpro_test_lotuswordpro \ > -)) > +#$(eval $(call gb_Module_add_check_targets,lotuswordpro,\ > +# CppunitTest_lotuswordpro_test_lotuswordpro \ > +#)) > > # vim: set noet sw=4 ts=4: > ============================= I hit the same problem, applied the suggested patch and tried gmake (in lotuswordpro) again.
/usr/ports/editors/libreoffice/work/libreoffice-core-3.5.2.2/solenv/gbuild/Library.mk:54: *** gb_Deliver_deliver: file does not exist in solver, and cannot be delivered: /usr/ports/editors/libreoffice/work/libreoffice-core-3.5.2.2/solver/unxfbsd.pro/lib/libsfxlo.so. Stop. gmake[1]: *** Waiting for unfinished jobs.... rm /usr/ports/editors/libreoffice/work/libreoffice-core-3.5.2.2/workdir/unxfbsd.pro/ExternalHeaders/Library/libsvxcorelo.so /usr/ports/editors/libreoffice/work/libreoffice-core-3.5.2.2/workdir/unxfbsd.pro/ExternalHeaders/Library/libsvtlo.so /usr/ports/editors/libreoffice/work/libreoffice-core-3.5.2.2/workdir/unxfbsd.pro/ExternalHeaders/Library/libsfxlo.so gmake[1]: Leaving directory `/usr/ports/editors/libreoffice/work/libreoffice-core-3.5.2.2/lotuswordpro' gmake: *** [source-env-and-recurse] Error 2 Any idea how I can proceed? -- R. Kevin Oberman, Network Engineer E-mail: kob6...@gmail.com _______________________________________________ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"