Hello.
For years I've been an happy user of FreeBSD + apcupsd + APC Smart-UPS 1500.
This has worked through various upgrades until a few days ago.
Right now my config is:
# uname -a
FreeBSD xxxxxx.xxxxx 9.0-RELEASE-p5 FreeBSD 9.0-RELEASE-p5 #2: Sat Dec 1
14:43:22 CET 2012 root@xxxxxx.xxxxx:/usr/obj/usr/src/sys/XXXXXX i386
# usbconfig
ugen0.1: <OHCI root HUB ATI> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
ugen1.1: <OHCI root HUB ATI> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
ugen2.1: <EHCI root HUB ATI> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps)
pwr=SAVE
ugen3.1: <OHCI root HUB ATI> at usbus3, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
ugen4.1: <OHCI root HUB ATI> at usbus4, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
ugen5.1: <EHCI root HUB ATI> at usbus5, cfg=0 md=HOST spd=HIGH (480Mbps)
pwr=SAVE
ugen6.1: <OHCI root HUB ATI> at usbus6, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
ugen0.2: <Bluetooth2.1+EDR CLASS1 vendor 0x0a12> at usbus0, cfg=0 md=HOST
spd=FULL (12Mbps) pwr=ON
ugen5.2: <Mass Storage Device Generic> at usbus5, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=ON
ugen3.2: <Trackball Logitech> at usbus3, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON
ugen0.3: <Smart-UPS 1500 FW653.13.I USB FW7.3 American Power Conversion> at
usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON
ugen3.3: <USB COMPOUND HUB SAMSUNG> at usbus3, cfg=0 md=HOST spd=FULL (12Mbps)
pwr=SAVE
ugen3.4: <USB Optical Mouse vendor 0x192f> at usbus3, cfg=0 md=HOST spd=LOW
(1.5Mbps) pwr=ON
ugen3.5: <product 0x8002 SAMSUNG> at usbus3, cfg=0 md=HOST spd=FULL (12Mbps)
pwr=ON
# grep -v "^#" /usr/local/etc/apcupsd/apcupsd.conf
UPSCABLE usb
UPSTYPE usb
LOCKFILE /var/spool/lock
ONBATTERYDELAY 6
BATTERYLEVEL 5
MINUTES 3
TIMEOUT 0
ANNOY 300
ANNOYDELAY 60
NOLOGON disable
KILLDELAY 0
NETSERVER on
NISIP 0.0.0.0
NISPORT 3551
EVENTSFILE /var/log/apcupsd.events
EVENTSFILEMAX 10
UPSCLASS standalone
UPSMODE disable
STATTIME 0
STATFILE /var/log/apcupsd.status
LOGSTATS off
DATATIME 0
As I said, until a few days ago, this setup would work perfectly... that
was until I added a BT dongle (ugen0.2).
After this apparently unrelated change, apcupsd will refuse to start 9
times out of 10 with the following:
apcupsd[2353]: apcupsd FATAL ERROR in generic-usb.c at line 674 Cannot find UPS
device -- For a link to detailed USB trouble shooting information, please see
<http://www.apcupsd.com/support.html>.
Repeated "service apcupsd restart" will finally get it up and running.
Any hint or pointer?
bye & Thanks
av.
_______________________________________________
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
