I'm trying to port some software that keeps failing when it tries to find a
config.h.
I know the config.h file is there but I think the compilation is failing
because it's trying to build ltdl and freebsd doesn't need that since
freebsd already has dlopen in libc.
Which configure flag could I try to get rid of building that lib? The full
configure --help file is below.
My current makefile has these settings:
HAS_CONFIGURE= yes
CONFIGURE_ARGS= --without-included-ltdl --disable-ltdl-install
USES= autoreconf gmake
the compilation fails with these errors:
Making all in upstream/ltdl
gmake[3]: Entering directory
'/usr/ports/dev/tmp/work/tmp-c590592/upstream/ltdl'
GEN libltdl/lt__argz.h
gmake all-am
gmake[4]: Entering directory
'/usr/ports/dev/tmp/work/tmp-c590592/upstream/ltdl'
CC loaders/dlopen.lo
In file included from loaders/dlopen.c:32:
libltdl/lt__private.h:35:12: fatal error: 'config.h' file not found
# include LT_CONFIG_H
^
<command line>:2:21: note: expanded from here
#define LT_CONFIG_H <config.h>
^~~~~~~~~~
1 error generated.
gmake[4]: *** [Makefile:731: loaders/dlopen.lo] Error 1
gmake[4]: Leaving directory
'/usr/ports/dev/tmp/work/tmp-c590592/upstream/ltdl'
gmake[3]: *** [Makefile:561: all] Error 2
gmake[3]: Leaving directory
'/usr/ports/dev/tmp/work/tmp-c590592/upstream/ltdl'
gmake[2]: *** [Makefile:605: all-recursive] Error 1
gmake[2]: Leaving directory '/usr/ports/dev/tmp/work/tmp-c590592'
gmake[1]: *** [Makefile:513: all] Error 2
gmake[1]: Leaving directory '/usr/ports/dev/tmp/work/tmp-c590592'
*** Error code 1
Stop.
make: stopped in /usr/ports/dev/tmp
To assign environment variables (e.g., CC, CFLAGS...), specify them as
VAR=VALUE. See below for descriptions of some of the useful variables.
Defaults for the options are specified in brackets.
Configuration:
-h, --help display this help and exit
--help=short display options specific to this package
--help=recursive display the short help of all the included
packages
-V, --version display version information and exit
-q, --quiet, --silent do not print `checking ...' messages
--cache-file=FILE cache test results in FILE [disabled]
-C, --config-cache alias for `--cache-file=config.cache'
-n, --no-create do not create output files
--srcdir=DIR find the sources in DIR [configure dir or `..']
Installation directories:
--prefix=PREFIX install architecture-independent files in PREFIX
[/usr/local]
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
[PREFIX]
By default, `make install' will install all the files in
`/usr/local/bin', `/usr/local/lib' etc. You can specify
an installation prefix other than `/usr/local' using `--prefix',
for instance `--prefix=$HOME'.
For better control, use the options below.
Fine tuning of the installation directories:
--bindir=DIR user executables [EPREFIX/bin]
--sbindir=DIR system admin executables [EPREFIX/sbin]
--libexecdir=DIR program executables [EPREFIX/libexec]
--sysconfdir=DIR read-only single-machine data [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data
[PREFIX/com]
--localstatedir=DIR modifiable single-machine data [PREFIX/var]
--libdir=DIR object code libraries [EPREFIX/lib]
--includedir=DIR C header files [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc [/usr/include]
--datarootdir=DIR read-only arch.-independent data root
[PREFIX/share]
--datadir=DIR read-only architecture-independent data
[DATAROOTDIR]
--infodir=DIR info documentation [DATAROOTDIR/info]
--localedir=DIR locale-dependent data [DATAROOTDIR/locale]
--mandir=DIR man documentation [DATAROOTDIR/man]
--docdir=DIR documentation root [DATAROOTDIR/doc/tmp]
--htmldir=DIR html documentation [DOCDIR]
--dvidir=DIR dvi documentation [DOCDIR]
--pdfdir=DIR pdf documentation [DOCDIR]
--psdir=DIR ps documentation [DOCDIR]
Program names:
--program-prefix=PREFIX prepend PREFIX to installed program
names
--program-suffix=SUFFIX append SUFFIX to installed program
names
--program-transform-name=PROGRAM run sed PROGRAM on installed program
names
System types:
--build=BUILD configure for building on BUILD [guessed]
--host=HOST cross-compile to build programs to run on HOST [BUILD]
Optional Features:
--disable-option-checking ignore unrecognized --enable/--with options
--disable-FEATURE do not include FEATURE (same as
--enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--enable-test-reports generate XML test reports [no]. Implies
--with-boost-unit-test-framework. XML test reports
can be post-processed with
tools/boost-test-report.
--enable-code-coverage collect run-time code coverage statistics [no].
Implies --with-boost-unit-test-framework and
--disable-shared. This requires a GNU C/C++
compiler
and turns off optimization for best results.
--enable-sane-config activate SANE compatibility component [yes].
Disable
this if you do not want the install step to touch
your system's SANE configuration. This is useful
if
you do not have the privileges needed to make
these
changes. For example when you configure with
--prefix=$HOME.
--enable-udev-config integrate udev activated device set up [yes].
Disable this if you do not want the install step
to
touch your system's udev configuration. This is
useful if you do not have the privileges needed to
make these changes. For example when you configure
with --prefix=$HOME.
--enable-silent-rules less verbose build output (undo: "make V=1")
--disable-silent-rules verbose build output (undo: "make V=0")
--disable-maintainer-mode
disable make rules and dependencies not useful
(and
sometimes confusing) to the casual installer
--enable-dependency-tracking
do not reject slow dependency extractors
--disable-dependency-tracking
speeds up one-time build
--disable-openmp do not use OpenMP
--disable-nls do not use Native Language Support
--disable-rpath do not hardcode runtime library paths
--enable-static[=PKGS] build static libraries [default=no]
--enable-shared[=PKGS] build shared libraries [default=yes]
--enable-fast-install[=PKGS]
optimize for fast installation [default=yes]
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-ltdl-install install libltdl
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--with-gtkmm build a gtkmm based graphical user interface
[check]
--with-jpeg include JPEG image format related filters [check]
--with-magick include image processing with convert [check].
Both
GraphicsMagick and ImageMagick are supported but
the
latter provides somewhat more functionality.
--with-magick-pp include autocrop and deskew support [check]. Both
the GraphicsMagick and ImageMagick C++ libraries
are
supported.
--with-tiff include TIFF image format related support [check]
--with-sane build SANE compatibility components [check]
--with-sane-confdir[=DIR]
where to find the SANE configuration directory
[guess]. Only use this if the guess is incorrect
and
you know exactly where your SANE configuration
directory is.
--with-included-boost use the Boost sources included here, if any
[check].
Directory locations for other --with-boost-*
options
will be overridden.
--with-udev-confdir[=DIR]
udev configuration directory [guess]. Only use
this
if the guess is incorrect and you know exactly
where
your udev configuration directory is.
--with-download-dir[=ABS_DIR]
where to cache upstream source downloads
[/path/to/upstream/downloads]. Distributable
creation may include upstream sources in a way
that
depends on our own distributed sources. For that
to
work as intended, it attempts to download upstream
archives into this location.
--with-gnu-ld assume the C compiler uses GNU ld [default=no]
--with-libiconv-prefix[=DIR] search for libiconv in DIR/include and
DIR/lib
--without-libiconv-prefix don't search for libiconv in includedir and
libdir
--with-libintl-prefix[=DIR] search for libintl in DIR/include and DIR/lib
--without-libintl-prefix don't search for libintl in includedir and
libdir
--with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use
both]
--with-aix-soname=aix|svr4|both
shared library versioning (aka "SONAME") variant
to
provide on AIX, [default=aix].
--with-gnu-ld assume the C compiler uses GNU ld [default=no]
--with-sysroot[=DIR] Search for dependent libraries within DIR (or the
compiler's sysroot if not specified).
--with-included-ltdl use the GNU ltdl sources included here
--with-ltdl-include=DIR use the ltdl headers installed in DIR
--with-ltdl-lib=DIR use the libltdl.la installed in DIR
--with-boost[=ARG] use Boost library from a standard location
(ARG=yes), from the specified location
(ARG=<path>),
or disable it (ARG=no) [ARG=yes]
--with-boost-libdir=LIB_DIR
Force given directory for boost libraries. Note
that
this will override library path detection, so use
this parameter only if default library detection
fails and you know exactly where your boost
libraries are located.
--with-boost-system[=special-lib]
use the System library from boost - it is possible
to specify a certain library for the linker e.g.
--with-boost-system=boost_system-gcc-mt
--with-boost-filesystem[=special-lib]
use the Filesystem library from boost - it is
possible to specify a certain library for the
linker
e.g.
--with-boost-filesystem=boost_filesystem-gcc-mt
--with-boost-iostreams[=special-lib]
use the IOStreams library from boost - it is
possible to specify a certain library for the
linker
e.g.
--with-boost-iostreams=boost_iostreams-gcc-mt-d-1_33_1
--with-boost-program-options[=special-lib]
use the program options library from boost - it is
possible to specify a certain library for the
linker
e.g.
--with-boost-program-options=boost_program_options-gcc-mt-1_33_1
--with-boost-regex[=special-lib]
use the Regex library from boost - it is possible
to
specify a certain library for the linker e.g.
--with-boost-regex=boost_regex-gcc-mt-d-1_33_1
--with-boost-thread[=special-lib]
use the Thread library from boost - it is possible
to specify a certain library for the linker e.g.
--with-boost-thread=boost_thread-gcc-mt
--with-boost-unit-test-framework[=special-lib]
use the Unit_Test_Framework library from boost -
it
is possible to specify a certain library for the
linker e.g.
--with-boost-unit-test-framework=boost_unit_test_framework-gcc
Some influential environment variables:
CC C compiler command
CFLAGS C compiler flags
LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
nonstandard directory <lib dir>
LIBS libraries to pass to the linker, e.g. -l<library>
CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
you have headers in a nonstandard directory <include dir>
CXX C++ compiler command
CXXFLAGS C++ compiler flags
PKG_CONFIG path to pkg-config utility
PKG_CONFIG_PATH
directories to add to pkg-config's search path
PKG_CONFIG_LIBDIR
path overriding pkg-config's built-in search path
CPP C preprocessor
LT_SYS_LIBRARY_PATH
User-defined run-time library search path.
CXXCPP C++ preprocessor
LIBUDEV_CFLAGS
C compiler flags for LIBUDEV, overriding pkg-config
LIBUDEV_LIBS
linker flags for LIBUDEV, overriding pkg-config
LIBUSB_CFLAGS
C compiler flags for LIBUSB, overriding pkg-config
LIBUSB_LIBS linker flags for LIBUSB, overriding pkg-config
LIBGTKMM_CFLAGS
C compiler flags for LIBGTKMM, overriding pkg-config
LIBGTKMM_LIBS
linker flags for LIBGTKMM, overriding pkg-config
Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.
_______________________________________________
freebsd-ports@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
