> On 7. Mar 2020, at 10:48, Ronald Klop <ronald-li...@klop.ws> wrote: > > On Thu, 05 Mar 2020 23:24:46 +0100, Michael Gmelin <free...@grem.de> wrote: > >> >> >>>> On 5. Mar 2020, at 14:46, Ronald Klop <ronald-li...@klop.ws> wrote: >>> >>> Hi, >>> >>> I needed "sysctl kern.evdev.rcpt_mask=6" to switch from sysmouse to >>> "hardware mouse". That fixed mouse integration with VirtualBox. >>> >>> Still have weird behaviour. Two finger swipe down & up (which normally only >>> scrolls) makes the browser go back. With xev I see that next to logical >>> button 4 & 5 for scrolling this also triggers logical buttons 8 & 9. Swipe >>> down presses 8 & 9 and up releases the buttons. Why? >> >> Hi, >> >> Please check/post the outputs of: >> libinput list-devices >> xinput list >> xinput list-props <mouse device id> > > See atttachments. "unnamed" is the vboxmouse driver which comes with the > virtualbox-ose-additions pkg.
What do you see when running xev libinput debug-events while two-finger scrolling? Do you see XF86Back and XF86Forward events? -m > Ronald. > > > > >> >> -m >> >> >>> Regards, >>> Ronald. >>> >>> >>>>> On Thu, 27 Feb 2020 19:42:34 +0100, Daniel Morante via freebsd-ports >>>>> <freebsd-ports@freebsd.org> wrote: >>>> Roland, >>>> Your issue might be related to this bug: >>>> https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=244110 >>>>> On 2/26/2020 5:29 PM, Ronald Klop wrote: >>>>> It works again. >>>>> Changed back from virtualboxvideo from drm-devel-kmod to the driver from >>>>> virtualbox-ose-additions. But did some other changes at the same time >>>>> also. Not sure yet what happened, but it was integration of the mouse >>>>> with virtualbox which failed somehow. >>>>> Regards, >>>>> Ronald. >>>>>> On Wed, 26 Feb 2020 20:40:14 +0100, Ronald Klop <ronald-li...@klop.ws> >>>>>> wrote: >>>>>> Hello, >>>>>> Since my upgrade to Xorg 1.20 things seem to work except that no mouse >>>>>> buttons work. Pointer movement works good still. >>>>>> I'm running a fairly recent FreeBSD 13-CURRENT in VirtualBox (On Windows >>>>>> 10). The mouse is a touchpad on my Lenovo IdeaPad laptop. >>>>>> Previously it worked using fine. >>>>>> What can I do or debug to fix this? >>>>>> Regards, >>>>>> Ronald. >>>>>> [ 23.241] >>>>>> X.Org X Server 1.20.7 >>>>>> X Protocol Version 11, Revision 0 >>>>>> [ 23.241] Build Operating System: FreeBSD 13.0-CURRENT amd64 >>>>>> [ 23.241] Current Operating System: FreeBSD sjakie 13.0-CURRENT >>>>>> FreeBSD >>>>>> 13.0-CURRENT #4 r357762M: Sun Feb 16 12:16:08 CET 2020 >>>>>> builder@sjakie:/data/src/obj-freebsd-current/data/src/freebsd-current/amd64.amd64/sys/GENERIC-NODEBUG >>>>>> amd64 >>>>>> [ 23.241] Build Date: 22 February 2020 07:06:47AM >>>>>> [ 23.241] >>>>>> [ 23.241] Current version of pixman: 0.38.4 >>>>>> [ 23.241] Before reporting problems, check http://wiki.x.org >>>>>> to make sure that you have the latest version. >>>>>> [ 23.241] Markers: (--) probed, (**) from config file, (==) default >>>>>> setting, >>>>>> (++) from command line, (!!) notice, (II) informational, >>>>>> (WW) warning, (EE) error, (NI) not implemented, (??) unknown. >>>>>> [ 23.241] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 24 >>>>>> 19:18:14 2020 >>>>>> [ 23.244] (==) Using system config directory >>>>>> "/usr/local/share/X11/xorg.conf.d" >>>>>> [ 23.246] (==) No Layout section. Using the first Screen section. >>>>>> [ 23.246] (==) No screen section available. Using defaults. >>>>>> [ 23.246] (**) |-->Screen "Default Screen Section" (0) >>>>>> [ 23.246] (**) | |-->Monitor "<default monitor>" >>>>>> [ 23.247] (==) No monitor specified for screen "Default Screen >>>>>> Section". >>>>>> Using a default monitor configuration. >>>>>> [ 23.247] (==) Automatically adding devices >>>>>> [ 23.247] (==) Automatically enabling devices >>>>>> [ 23.247] (==) Not automatically adding GPU devices >>>>>> [ 23.247] (==) Max clients allowed: 256, resource mask: 0x1fffff >>>>>> [ 23.262] (==) FontPath set to: >>>>>> /usr/local/share/fonts/misc/, >>>>>> /usr/local/share/fonts/TTF/, >>>>>> /usr/local/share/fonts/OTF/, >>>>>> /usr/local/share/fonts/Type1/, >>>>>> /usr/local/share/fonts/100dpi/, >>>>>> /usr/local/share/fonts/75dpi/, >>>>>> catalogue:/usr/local/etc/X11/fontpath.d >>>>>> [ 23.263] (==) ModulePath set to "/usr/local/lib/xorg/modules" >>>>>> [ 23.263] (II) The server relies on udev to provide the list of input >>>>>> devices. >>>>>> If no devices become available, reconfigure udev or disable >>>>>> AutoAddDevices. >>>>>> [ 23.263] (II) Loader magic: 0x435010 >>>>>> [ 23.263] (II) Module ABI versions: >>>>>> [ 23.263] X.Org ANSI C Emulation: 0.4 >>>>>> [ 23.263] X.Org Video Driver: 24.1 >>>>>> [ 23.263] X.Org XInput driver : 24.1 >>>>>> [ 23.263] X.Org Server Extension : 10.0 >>>>>> [ 23.263] (--) PCI:*(0@0:2:0) 80ee:beef:0000:0000 rev 0, Mem @ >>>>>> 0xe0000000/134217728, BIOS @ 0x????????/65536 >>>>>> [ 23.263] (II) LoadModule: "glx" >>>>>> [ 23.265] (II) Loading >>>>>> /usr/local/lib/xorg/modules/extensions/libglx.so >>>>>> [ 23.292] (II) Module glx: vendor="X.Org Foundation" >>>>>> [ 23.292] compiled for 1.20.7, module version = 1.0.0 >>>>>> [ 23.292] ABI class: X.Org Server Extension, version 10.0 >>>>>> [ 23.292] (==) Matched vboxvideo as autoconfigured driver 0 >>>>>> [ 23.292] (==) Matched modesetting as autoconfigured driver 1 >>>>>> [ 23.292] (==) Matched scfb as autoconfigured driver 2 >>>>>> [ 23.292] (==) Matched vesa as autoconfigured driver 3 >>>>>> [ 23.292] (==) Assigned the driver to the xf86ConfigLayout >>>>>> [ 23.292] (II) LoadModule: "vboxvideo" >>>>>> [ 23.292] (II) Loading >>>>>> /usr/local/lib/xorg/modules/drivers/vboxvideo_drv.so >>>>>> [ 23.294] (II) Module vboxvideo: vendor="Oracle Corporation" >>>>>> [ 23.294] compiled for 1.20.7, module version = 1.0.1 >>>>>> [ 23.294] Module class: X.Org Video Driver >>>>>> [ 23.294] ABI class: X.Org Video Driver, version 24.1 >>>>>> [ 23.294] (**) Load address of symbol "VBOXVIDEO" is 0x801b8d010 >>>>>> [ 23.294] (II) LoadModule: "modesetting" >>>>>> [ 23.294] (II) Loading >>>>>> /usr/local/lib/xorg/modules/drivers/modesetting_drv.so >>>>>> [ 23.295] (II) Module modesetting: vendor="X.Org Foundation" >>>>>> [ 23.295] compiled for 1.20.7, module version = 1.20.7 >>>>>> [ 23.295] Module class: X.Org Video Driver >>>>>> [ 23.295] ABI class: X.Org Video Driver, version 24.1 >>>>>> [ 23.295] (II) LoadModule: "scfb" >>>>>> [ 23.295] (II) Loading /usr/local/lib/xorg/modules/drivers/scfb_drv.so >>>>>> [ 23.297] (II) Module scfb: vendor="X.Org Foundation" >>>>>> [ 23.297] compiled for 1.20.7, module version = 0.0.5 >>>>>> [ 23.297] ABI class: X.Org Video Driver, version 24.1 >>>>>> [ 23.297] (II) LoadModule: "vesa" >>>>>> [ 23.297] (II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv.so >>>>>> [ 23.298] (II) Module vesa: vendor="X.Org Foundation" >>>>>> [ 23.298] compiled for 1.20.7, module version = 2.4.0 >>>>>> [ 23.298] Module class: X.Org Video Driver >>>>>> [ 23.298] ABI class: X.Org Video Driver, version 24.1 >>>>>> [ 23.298] (II) VBoxVideo: guest driver for VirtualBox: vbox >>>>>> [ 23.298] (II) modesetting: Driver for Modesetting Kernel Drivers: kms >>>>>> [ 23.298] (II) scfb: driver for wsdisplay framebuffer: scfb >>>>>> [ 23.298] (II) VESA: driver for VESA chipsets: vesa >>>>>> [ 23.298] (--) Using syscons driver with X support (version 2.0) >>>>>> [ 23.298] (++) using VT number 9 >>>>>> [ 23.299] (II) vboxvideo: kernel driver found, not loading. >>>>>> [ 23.311] (**) modeset(0): claimed PCI slot 0@0:2:0 >>>>>> [ 23.311] (II) modeset(0): using default device >>>>>> [ 23.311] (WW) Falling back to old probe method for scfb >>>>>> [ 23.311] scfb trace: probe start >>>>>> [ 23.311] scfb trace: probe done >>>>>> [ 23.311] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card >>>>>> support >>>>>> [ 23.312] (II) modeset(0): Creating default Display subsection in >>>>>> Screen section >>>>>> "Default Screen Section" for depth/fbbpp 24/32 >>>>>> [ 23.312] (==) modeset(0): Depth 24, (==) framebuffer bpp 32 >>>>>> [ 23.312] (==) modeset(0): RGB weight 888 >>>>>> [ 23.312] (==) modeset(0): Default visual is TrueColor >>>>>> [ 23.312] (II) Loading sub module "glamoregl" >>>>>> [ 23.312] (II) LoadModule: "glamoregl" >>>>>> [ 23.312] (II) Loading /usr/local/lib/xorg/modules/libglamoregl.so >>>>>> [ 23.356] (II) Module glamoregl: vendor="X.Org Foundation" >>>>>> [ 23.356] compiled for 1.20.7, module version = 1.0.1 >>>>>> [ 23.356] ABI class: X.Org ANSI C Emulation, version 0.4 >>>>>> [ 23.961] (II) modeset(0): Refusing to try glamor on llvmpipe >>>>>> [ 23.970] (EE) modeset(0): glamor initialization failed >>>>>> [ 23.970] (II) modeset(0): ShadowFB: preferred NO, enabled NO >>>>>> [ 23.971] (II) modeset(0): Output VGA-1 has no monitor section >>>>>> [ 23.972] (II) modeset(0): EDID for output VGA-1 >>>>>> [ 23.972] (II) modeset(0): Manufacturer: VBX Model: 0 Serial#: >>>>>> 56624640 >>>>>> [ 23.972] (II) modeset(0): Year: 1990 Week: 1 >>>>>> [ 23.972] (II) modeset(0): EDID Version: 1.3 >>>>>> [ 23.972] (II) modeset(0): Digital Display Input >>>>>> [ 23.972] (II) modeset(0): Indeterminate output size >>>>>> [ 23.972] (II) modeset(0): Gamma: 2.20 >>>>>> [ 23.972] (II) modeset(0): DPMS capabilities: StandBy Suspend Off >>>>>> [ 23.972] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb >>>>>> 4:4:4 >>>>>> [ 23.972] (II) modeset(0): Default color space is primary color space >>>>>> [ 23.972] (II) modeset(0): First detailed timing is preferred mode >>>>>> [ 23.972] (II) modeset(0): redX: 0.640 redY: 0.330 greenX: 0.300 >>>>>> greenY: 0.600 >>>>>> [ 23.972] (II) modeset(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 >>>>>> whiteY: 0.329 >>>>>> [ 23.972] (II) modeset(0): Manufacturer's mask: 0 >>>>>> [ 23.972] (II) modeset(0): Supported detailed timing: >>>>>> [ 23.972] (II) modeset(0): clock: 80.5 MHz Image Size: 0 x 0 mm >>>>>> [ 23.972] (II) modeset(0): h_active: 1536 h_sync: 1538 h_sync_end >>>>>> 1540 h_blank_end 1542 h_border: 0 >>>>>> [ 23.972] (II) modeset(0): v_active: 864 v_sync: 864 v_sync_end 898 >>>>>> v_blanking: 870 v_border: 0 >>>>>> [ 23.972] (II) modeset(0): Ranges: V min: 0 V max: 200 Hz, H min: 0 H >>>>>> max: 200 kHz, PixClock max 1005 MHz >>>>>> [ 23.972] (II) modeset(0): Monitor name: VBOX monitor >>>>>> [ 23.972] (II) modeset(0): EDID (in hex): >>>>>> [ 23.972] (II) modeset(0): 00ffffffffffff005858000000066003 >>>>>> [ 23.972] (II) modeset(0): 0100010380000078eeee91a3544c9926 >>>>>> [ 23.972] (II) modeset(0): 0f505400000001010101010101010101 >>>>>> [ 23.973] (II) modeset(0): 010101010101711f0006606006300202 >>>>>> [ 23.973] (II) modeset(0): 0202000000000000000000fd0000c800 >>>>>> [ 23.973] (II) modeset(0): c864000a202020202020000000fc0056 >>>>>> [ 23.973] (II) modeset(0): 424f58206d6f6e69746f720a00000010 >>>>>> [ 23.973] (II) modeset(0): 000a2020202020202020202020200068 >>>>>> [ 23.973] (II) modeset(0): Printing probed modes for output VGA-1 >>>>>> [ 23.973] (II) modeset(0): Modeline "1536x864"x60.0 109.31 1536 1624 >>>>>> 1784 2032 864 867 872 897 -hsync +vsync (53.8 kHz P) >>>>>> [ 23.973] (II) modeset(0): Modeline "2560x1600"x60.0 348.50 2560 2752 >>>>>> 3032 3504 1600 1603 1609 1658 -hsync +vsync (99.5 kHz e) >>>>>> [ 23.973] (II) modeset(0): Modeline "2560x1600"x60.0 268.50 2560 2608 >>>>>> 2640 2720 1600 1603 1609 1646 +hsync -vsync (98.7 kHz e) >>>>>> [ 23.973] (II) modeset(0): Modeline "1920x1440"x60.0 234.00 1920 2048 >>>>>> 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz e) >>>>>> [ 23.973] (II) modeset(0): Modeline "1856x1392"x60.0 218.25 1856 1952 >>>>>> 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.3 kHz e) >>>>>> [ 23.973] (II) modeset(0): Modeline "1792x1344"x60.0 204.75 1792 1920 >>>>>> 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.6 kHz e) >>>>>> [ 23.973] (II) modeset(0): Modeline "2048x1152"x60.0 162.00 2048 2074 >>>>>> 2154 2250 1152 1153 1156 1200 +hsync +vsync (72.0 kHz e) >>>>>> [ 23.973] (II) modeset(0): Modeline "1920x1200"x59.9 193.25 1920 2056 >>>>>> 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e) >>>>>> [ 23.973] (II) modeset(0): Modeline "1920x1200"x60.0 154.00 1920 1968 >>>>>> 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz e) >>>>>> [ 23.973] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 >>>>>> 2052 2200 1080 1084 1089 1125 -hsync -vsync (67.5 kHz e) >>>>>> [ 23.973] (II) modeset(0): Modeline "1600x1200"x60.0 162.00 1600 1664 >>>>>> 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) >>>>>> [ 23.973] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 >>>>>> 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e) >>>>>> [ 23.973] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 >>>>>> 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e) >>>>>> [ 23.973] (II) modeset(0): Modeline "1400x1050"x60.0 121.75 1400 1488 >>>>>> 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e) >>>>>> [ 23.973] (II) modeset(0): Modeline "1400x1050"x59.9 101.00 1400 1448 >>>>>> 1480 1560 1050 1053 1057 1080 +hsync -vsync (64.7 kHz e) >>>>>> [ 23.973] (II) modeset(0): Modeline "1600x900"x60.0 108.00 1600 1624 >>>>>> 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz e) >>>>>> [ 23.973] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 >>>>>> 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) >>>>>> [ 23.973] (II) modeset(0): Modeline "1440x900"x59.9 106.50 1440 1520 >>>>>> 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e) >>>>>> [ 23.973] (II) modeset(0): Modeline "1440x900"x59.9 88.75 1440 1488 >>>>>> 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e) >>>>>> [ 23.973] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 >>>>>> 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) >>>>>> [ 23.973] (II) modeset(0): Modeline "1366x768"x59.8 85.50 1366 1436 >>>>>> 1579 1792 768 771 774 798 +hsync +vsync (47.7 kHz e) >>>>>> [ 23.973] (II) modeset(0): Modeline "1366x768"x60.0 72.00 1366 1380 >>>>>> 1436 1500 768 769 772 800 +hsync +vsync (48.0 kHz e) >>>>>> [ 23.974] (II) modeset(0): Modeline "1360x768"x60.0 85.50 1360 1424 >>>>>> 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e) >>>>>> [ 23.974] (II) modeset(0): Modeline "1280x800"x59.8 83.50 1280 1352 >>>>>> 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e) >>>>>> [ 23.974] (II) modeset(0): Modeline "1280x800"x59.9 71.00 1280 1328 >>>>>> 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e) >>>>>> [ 23.974] (II) modeset(0): Modeline "1280x768"x59.9 79.50 1280 1344 >>>>>> 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e) >>>>>> [ 23.974] (II) modeset(0): Modeline "1280x768"x60.0 68.25 1280 1328 >>>>>> 1360 1440 768 771 778 790 +hsync -vsync (47.4 kHz e) >>>>>> [ 23.974] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 >>>>>> 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) >>>>>> [ 23.974] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 >>>>>> 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) >>>>>> [ 23.974] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 >>>>>> 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) >>>>>> [ 23.974] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 >>>>>> 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) >>>>>> [ 23.974] (II) modeset(0): Modeline "848x480"x60.0 33.75 848 864 976 >>>>>> 1088 480 486 494 517 +hsync +vsync (31.0 kHz e) >>>>>> [ 23.974] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 >>>>>> 800 480 490 492 525 -hsync -vsync (31.5 kHz e) >>>>>> [ 23.974] (II) modeset(0): Output VGA-1 connected >>>>>> [ 23.974] (II) modeset(0): Using exact sizes for initial modes >>>>>> [ 23.974] (II) modeset(0): Output VGA-1 using initial mode 1536x864 >>>>>> +0+0 >>>>>> [ 23.974] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0) >>>>>> [ 23.974] (==) modeset(0): DPI set to (96, 96) >>>>>> [ 23.974] (II) Loading sub module "fb" >>>>>> [ 23.974] (II) LoadModule: "fb" >>>>>> [ 23.974] (II) Loading /usr/local/lib/xorg/modules/libfb.so >>>>>> [ 23.975] (II) Module fb: vendor="X.Org Foundation" >>>>>> [ 23.975] compiled for 1.20.7, module version = 1.0.0 >>>>>> [ 23.975] ABI class: X.Org ANSI C Emulation, version 0.4 >>>>>> [ 23.975] (II) UnloadModule: "scfb" >>>>>> [ 23.975] (II) Unloading scfb >>>>>> [ 23.975] (II) UnloadModule: "vesa" >>>>>> [ 23.976] (II) Unloading vesa >>>>>> [ 23.978] (==) modeset(0): Backing store enabled >>>>>> [ 23.978] (==) modeset(0): Silken mouse enabled >>>>>> [ 23.979] (II) modeset(0): Initializing kms color map for depth 24, 8 >>>>>> bpc. >>>>>> [ 23.979] (==) modeset(0): DPMS enabled >>>>>> [ 23.979] (II) Initializing extension Generic Event Extension >>>>>> [ 23.980] (II) Initializing extension SHAPE >>>>>> [ 23.980] (II) Initializing extension MIT-SHM >>>>>> [ 23.981] (II) Initializing extension XInputExtension >>>>>> [ 23.982] (II) Initializing extension XTEST >>>>>> [ 23.983] (II) Initializing extension BIG-REQUESTS >>>>>> [ 23.984] (II) Initializing extension SYNC >>>>>> [ 23.984] (II) Initializing extension XKEYBOARD >>>>>> [ 23.985] (II) Initializing extension XC-MISC >>>>>> [ 23.985] (II) Initializing extension SECURITY >>>>>> [ 23.986] (II) Initializing extension XFIXES >>>>>> [ 23.987] (II) Initializing extension RENDER >>>>>> [ 23.987] (II) Initializing extension RANDR >>>>>> [ 23.988] (II) Initializing extension COMPOSITE >>>>>> [ 23.989] (II) Initializing extension DAMAGE >>>>>> [ 23.989] (II) Initializing extension MIT-SCREEN-SAVER >>>>>> [ 23.990] (II) Initializing extension DOUBLE-BUFFER >>>>>> [ 23.990] (II) Initializing extension RECORD >>>>>> [ 23.991] (II) Initializing extension DPMS >>>>>> [ 23.991] (II) Initializing extension Present >>>>>> [ 23.992] (II) Initializing extension DRI3 >>>>>> [ 23.992] (II) Initializing extension X-Resource >>>>>> [ 23.992] (II) Initializing extension XVideo >>>>>> [ 23.993] (II) Initializing extension XVideo-MotionCompensation >>>>>> [ 23.993] (II) Initializing extension GLX >>>>>> [ 23.993] (II) AIGLX: Screen 0 is not DRI2 capable >>>>>> [ 24.058] (II) IGLX: Loaded and initialized swrast >>>>>> [ 24.058] (II) GLX: Initialized DRISWRAST GL provider for screen 0 >>>>>> [ 24.058] (II) Initializing extension XFree86-VidModeExtension >>>>>> [ 24.059] (II) Initializing extension XFree86-DGA >>>>>> [ 24.059] (II) Initializing extension XFree86-DRI >>>>>> [ 24.059] (II) Initializing extension DRI2 >>>>>> [ 24.060] (II) modeset(0): Damage tracking initialized >>>>>> [ 24.060] (II) modeset(0): Setting screen physical size to 406 x 228 >>>>>> [ 24.263] (II) config/udev: Adding input device System mouse >>>>>> (/dev/input/event0) >>>>>> [ 24.263] (**) System mouse: Applying InputClass "libinput pointer >>>>>> catchall" >>>>>> [ 24.263] (II) LoadModule: "libinput" >>>>>> [ 24.264] (II) Loading >>>>>> /usr/local/lib/xorg/modules/input/libinput_drv.so >>>>>> [ 24.304] (II) Module libinput: vendor="X.Org Foundation" >>>>>> [ 24.304] compiled for 1.20.7, module version = 0.28.2 >>>>>> [ 24.304] Module class: X.Org XInput Driver >>>>>> [ 24.304] ABI class: X.Org XInput driver, version 24.1 >>>>>> [ 24.304] (II) Using input driver 'libinput' for 'System mouse' >>>>>> [ 24.304] (**) System mouse: always reports core events >>>>>> [ 24.304] (**) Option "Device" "/dev/input/event0" >>>>>> [ 24.304] (**) Option "_source" "server/udev" >>>>>> [ 24.328] (II) event0 - System mouse: is tagged by udev as: Mouse >>>>>> [ 24.328] (II) event0 - System mouse: device is a pointer >>>>>> [ 24.329] (II) event0 - System mouse: device removed >>>>>> [ 24.329] (**) Option "config_info" "udev:/dev/input/event0" >>>>>> [ 24.329] (II) XINPUT: Adding extended input device "System mouse" >>>>>> (type: MOUSE, id 6) >>>>>> [ 24.329] (**) Option "AccelerationScheme" "none" >>>>>> [ 24.329] (**) System mouse: (accel) selected scheme none/0 >>>>>> [ 24.329] (**) System mouse: (accel) acceleration factor: 2.000 >>>>>> [ 24.329] (**) System mouse: (accel) acceleration threshold: 4 >>>>>> [ 24.331] (II) event0 - System mouse: is tagged by udev as: Mouse >>>>>> [ 24.331] (II) event0 - System mouse: device is a pointer >>>>>> [ 24.332] (II) config/udev: Adding input device System keyboard >>>>>> multiplexer (/dev/input/event1) >>>>>> [ 24.332] (**) System keyboard multiplexer: Applying InputClass "Evdev >>>>>> keyboard" >>>>>> [ 24.332] (**) System keyboard multiplexer: Applying InputClass >>>>>> "libinput keyboard catchall" >>>>>> [ 24.332] (II) Using input driver 'libinput' for 'System keyboard >>>>>> multiplexer' >>>>>> [ 24.332] (**) System keyboard multiplexer: always reports core events >>>>>> [ 24.332] (**) Option "Device" "/dev/input/event1" >>>>>> [ 24.332] (**) Option "_source" "server/udev" >>>>>> [ 24.335] (II) event1 - System keyboard multiplexer: is tagged by >>>>>> udev >>>>>> as: Keyboard >>>>>> [ 24.335] (II) event1 - System keyboard multiplexer: device is a >>>>>> keyboard >>>>>> [ 24.336] (II) event1 - System keyboard multiplexer: device removed >>>>>> [ 24.336] (**) Option "config_info" "udev:/dev/input/event1" >>>>>> [ 24.336] (II) XINPUT: Adding extended input device "System keyboard >>>>>> multiplexer" (type: KEYBOARD, id 7) >>>>>> [ 24.336] (**) Option "xkb_rules" "evdev" >>>>>> [ 24.419] (II) event1 - System keyboard multiplexer: is tagged by >>>>>> udev >>>>>> as: Keyboard >>>>>> [ 24.419] (II) event1 - System keyboard multiplexer: device is a >>>>>> keyboard >>>>>> [ 24.420] (II) config/udev: Adding input device AT keyboard >>>>>> (/dev/input/event2) >>>>>> [ 24.420] (**) AT keyboard: Applying InputClass "Evdev keyboard" >>>>>> [ 24.420] (**) AT keyboard: Applying InputClass "libinput keyboard >>>>>> catchall" >>>>>> [ 24.420] (II) Using input driver 'libinput' for 'AT keyboard' >>>>>> [ 24.420] (**) AT keyboard: always reports core events >>>>>> [ 24.420] (**) Option "Device" "/dev/input/event2" >>>>>> [ 24.420] (**) Option "_source" "server/udev" >>>>>> [ 24.421] (II) event2 - AT keyboard: is tagged by udev as: Keyboard >>>>>> [ 24.422] (II) event2 - AT keyboard: device is a keyboard >>>>>> [ 24.422] (II) event2 - AT keyboard: device removed >>>>>> [ 24.422] (**) Option "config_info" "udev:/dev/input/event2" >>>>>> [ 24.422] (II) XINPUT: Adding extended input device "AT keyboard" >>>>>> (type: KEYBOARD, id 8) >>>>>> [ 24.422] (**) Option "xkb_rules" "evdev" >>>>>> [ 24.424] (II) event2 - AT keyboard: is tagged by udev as: Keyboard >>>>>> [ 24.424] (II) event2 - AT keyboard: device is a keyboard >>>>>> [ 24.425] (II) config/udev: Adding input device IntelliMouse Explorer >>>>>> (/dev/input/event3) >>>>>> [ 24.425] (**) IntelliMouse Explorer: Applying InputClass "libinput >>>>>> pointer catchall" >>>>>> [ 24.425] (II) Using input driver 'libinput' for 'IntelliMouse >>>>>> Explorer' >>>>>> [ 24.426] (**) IntelliMouse Explorer: always reports core events >>>>>> [ 24.426] (**) Option "Device" "/dev/input/event3" >>>>>> [ 24.426] (**) Option "_source" "server/udev" >>>>>> [ 24.434] (II) event3 - IntelliMouse Explorer: is tagged by udev as: >>>>>> Mouse >>>>>> [ 24.435] (II) event3 - IntelliMouse Explorer: device is a pointer >>>>>> [ 24.436] (II) event3 - IntelliMouse Explorer: device removed >>>>>> [ 24.462] (**) Option "config_info" "udev:/dev/input/event3" >>>>>> [ 24.462] (II) XINPUT: Adding extended input device "IntelliMouse >>>>>> Explorer" (type: MOUSE, id 9) >>>>>> [ 24.462] (**) Option "AccelerationScheme" "none" >>>>>> [ 24.462] (**) IntelliMouse Explorer: (accel) selected scheme none/0 >>>>>> [ 24.462] (**) IntelliMouse Explorer: (accel) acceleration factor: >>>>>> 2.000 >>>>>> [ 24.462] (**) IntelliMouse Explorer: (accel) acceleration threshold: >>>>>> 4 >>>>>> [ 24.471] (II) event3 - IntelliMouse Explorer: is tagged by udev as: >>>>>> Mouse >>>>>> [ 24.471] (II) event3 - IntelliMouse Explorer: device is a pointer >>>>>> [ 24.472] (II) config/udev: Adding input device VirtualBox USB >>>>>> Multi-Touch (/dev/input/event4) >>>>>> [ 24.472] (**) VirtualBox USB Multi-Touch: Applying InputClass >>>>>> "libinput touchscreen catchall" >>>>>> [ 24.472] (II) Using input driver 'libinput' for 'VirtualBox USB >>>>>> Multi-Touch' >>>>>> [ 24.472] (**) VirtualBox USB Multi-Touch: always reports core events >>>>>> [ 24.472] (**) Option "Device" "/dev/input/event4" >>>>>> [ 24.472] (**) Option "_source" "server/udev" >>>>>> [ 24.475] (II) event4 - VirtualBox USB Multi-Touch, class 0/0, rev >>>>>> 1.10/1.00, addr 2: is tagged by udev as: Touchscreen >>>>>> [ 24.476] (II) event4 - VirtualBox USB Multi-Touch, class 0/0, rev >>>>>> 1.10/1.00, addr 2: device is a touch device >>>>>> [ 24.477] (II) event4 - VirtualBox USB Multi-Touch, class 0/0, rev >>>>>> 1.10/1.00, addr 2: device removed >>>>>> [ 24.477] (**) Option "config_info" "udev:/dev/input/event4" >>>>>> [ 24.477] (II) XINPUT: Adding extended input device "VirtualBox USB >>>>>> Multi-Touch" (type: TOUCHSCREEN, id 10) >>>>>> [ 24.478] (**) Option "AccelerationScheme" "none" >>>>>> [ 24.478] (**) VirtualBox USB Multi-Touch: (accel) selected scheme >>>>>> none/0 >>>>>> [ 24.478] (**) VirtualBox USB Multi-Touch: (accel) acceleration >>>>>> factor: >>>>>> 2.000 >>>>>> [ 24.478] (**) VirtualBox USB Multi-Touch: (accel) acceleration >>>>>> threshold: 4 >>>>>> [ 24.480] (II) event4 - VirtualBox USB Multi-Touch, class 0/0, rev >>>>>> 1.10/1.00, addr 2: is tagged by udev as: Touchscreen >>>>>> [ 24.482] (II) event4 - VirtualBox USB Multi-Touch, class 0/0, rev >>>>>> 1.10/1.00, addr 2: device is a touch device >>>>>> [ 29.559] (II) modeset(0): EDID vendor "VBX", prod id 0 >>>>>> [ 29.559] (II) modeset(0): DDCModeFromDetailedTiming: 1536x864 >>>>>> Warning: >>>>>> We only handle separate sync. >>>>>> [ 29.559] (II) modeset(0): Using EDID range info for horizontal sync >>>>>> [ 29.559] (II) modeset(0): Using EDID range info for vertical refresh >>>>>> [ 8249.704] (II) config/udev: removing device VirtualBox USB Multi-Touch >>>>>> [ 8249.705] (II) event4 - VirtualBox USB Multi-Touch, class 0/0, rev >>>>>> 1.10/1.00, addr 2: device removed >>>>>> [ 8249.705] (II) UnloadModule: "libinput" >>>>>> [ 8250.406] (II) config/udev: Adding input device VirtualBox USB >>>>>> Multi-Touch (/dev/input/event4) >>>>>> [ 8250.406] (**) VirtualBox USB Multi-Touch: Applying InputClass >>>>>> "libinput touchscreen catchall" >>>>>> [ 8250.406] (II) Using input driver 'libinput' for 'VirtualBox USB >>>>>> Multi-Touch' >>>>>> [ 8250.406] (**) VirtualBox USB Multi-Touch: always reports core events >>>>>> [ 8250.406] (**) Option "Device" "/dev/input/event4" >>>>>> [ 8250.407] (**) Option "_source" "server/udev" >>>>>> [ 8250.410] (II) event4 - VirtualBox USB Multi-Touch, class 0/0, rev >>>>>> 1.10/1.00, addr 2: is tagged by udev as: Touchscreen >>>>>> [ 8250.411] (II) event4 - VirtualBox USB Multi-Touch, class 0/0, rev >>>>>> 1.10/1.00, addr 2: device is a touch device >>>>>> [ 8250.412] (II) event4 - VirtualBox USB Multi-Touch, class 0/0, rev >>>>>> 1.10/1.00, addr 2: device removed >>>>>> [ 8250.412] (**) Option "config_info" "udev:/dev/input/event4" >>>>>> [ 8250.412] (II) XINPUT: Adding extended input device "VirtualBox USB >>>>>> Multi-Touch" (type: TOUCHSCREEN, id 10) >>>>>> [ 8250.417] (**) Option "AccelerationScheme" "none" >>>>>> [ 8250.417] (**) VirtualBox USB Multi-Touch: (accel) selected scheme >>>>>> none/0 >>>>>> [ 8250.417] (**) VirtualBox USB Multi-Touch: (accel) acceleration >>>>>> factor: >>>>>> 2.000 >>>>>> [ 8250.417] (**) VirtualBox USB Multi-Touch: (accel) acceleration >>>>>> threshold: 4 >>>>>> [ 8250.420] (II) event4 - VirtualBox USB Multi-Touch, class 0/0, rev >>>>>> 1.10/1.00, addr 2: is tagged by udev as: Touchscreen >>>>>> [ 8250.422] (II) event4 - VirtualBox USB Multi-Touch, class 0/0, rev >>>>>> 1.10/1.00, addr 2: device is a touch device >>>>>> _______________________________________________ >>>>>> freebsd-ports@freebsd.org mailing list >>>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-ports >>>>>> To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org" >>>>> _______________________________________________ >>>>> freebsd-ports@freebsd.org mailing list >>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-ports >>>>> To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org" >>>> _______________________________________________ >>>> freebsd-ports@freebsd.org mailing list >>>> https://lists.freebsd.org/mailman/listinfo/freebsd-ports >>>> To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org" >>> _______________________________________________ >>> freebsd-ports@freebsd.org mailing list >>> https://lists.freebsd.org/mailman/listinfo/freebsd-ports >>> To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org" > <libinput.list-devices.txt> > <xinput.list-props.11.txt> > <xinput.list.txt> > _______________________________________________ > freebsd-ports@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-ports > To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org" _______________________________________________ freebsd-ports@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"