Not too sure, but try this:
Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 24 DefaultModes "1024x768" <--- Added this SubSection "Display" Depth 24 Modes "1024x768" "800x600" "640x480" EndSubSection EndSection Pavan Balaji, CIS Graduate Student, Ohio State University "Being happy doesn't mean that everything is perfect... It just means that you have decided to see beyond the imperfections" -- Rash > -----Original Message----- > From: Jason Barnes [mailto:[EMAIL PROTECTED]] > Sent: Friday, July 12, 2002 1:12 PM > To: [EMAIL PROTECTED] > Subject: XFree86 4.2 screen resolutions > > > > Hi! I am running FreeBSD 4.6-RELEASE and am just biting the > bullet to upgrade to XFree86 4.2 for purposes of KDE3. Everything is > working -- except that I can't seem to get the screen to go > into any mode > but 640x480 (any color depth). I want to get to 1024x768 > (24bit), and I > know this should be possible because it was running that way > under XFree86 > 3.3. I would greatly apreciate any insight you might have into this > matter. Here is my XF86Config: > > Section "ServerLayout" > Identifier "XFree86 Configured" > Screen 0 "Screen0" 0 0 > InputDevice "Mouse0" "CorePointer" > InputDevice "Keyboard0" "CoreKeyboard" > EndSection > > Section "Files" > RgbPath "/usr/X11R6/lib/X11/rgb" > ModulePath "/usr/X11R6/lib/modules" > FontPath "/usr/X11R6/lib/X11/fonts/misc/" > FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" > FontPath "/usr/X11R6/lib/X11/fonts/Type1/" > FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" > FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" > EndSection > > Section "Module" > Load "extmod" > Load "xie" > Load "pex5" > Load "glx" > Load "dri" > Load "dbe" > Load "record" > Load "xtrap" > Load "speedo" > Load "type1" > EndSection > > Section "InputDevice" > Identifier "Keyboard0" > Driver "keyboard" > EndSection > > Section "InputDevice" > Identifier "Mouse0" > Driver "mouse" > Option "Protocol" "MouseSystems" > Option "Device" "/dev/sysmouse" > EndSection > > Section "Monitor" > #DisplaySize 280 210 # mm > Identifier "Monitor0" > VendorName "JEN" > ModelName "1055" > Option "DPMS" > EndSection > > Section "Device" > ### Available Driver options are:- > ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", > ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" > ### [arg]: arg optional > #Option "slow_edodram" # [<bool>] > #Option "slow_dram" # [<bool>] > #Option "fast_dram" # [<bool>] > #Option "fpm_vram" # [<bool>] > #Option "pci_burst" # [<bool>] > #Option "fifo_conservative" # [<bool>] > #Option "fifo_moderate" # [<bool>] > #Option "fifo_aggressive" # [<bool>] > #Option "pci_retry" # [<bool>] > #Option "NoAccel" # [<bool>] > #Option "early_ras_precharge" # [<bool>] > #Option "late_ras_precharge" # [<bool>] > #Option "lcd_center" # [<bool>] > #Option "set_lcdclk" # <i> > #Option "set_mclk" # <freq> > #Option "set_refclk" # <freq> > #Option "show_cache" # [<bool>] > #Option "HWCursor" # [<bool>] > #Option "SWCursor" # [<bool>] > #Option "ShadowFB" # [<bool>] > #Option "Rotate" # [<str>] > #Option "UseFB" # [<bool>] > #Option "mxcr3afix" # [<bool>] > #Option "XVideo" # [<bool>] > Identifier "Card0" > Driver "s3virge" > VendorName "S3" > BoardName "ViRGE/GX2" > BusID "PCI:0:8:0" > VideoRAM 4096 > EndSection > > Section "Screen" > Identifier "Screen0" > Device "Card0" > Monitor "Monitor0" > DefaultDepth 24 > # SubSection "Display" > # Depth 1 > # EndSubSection > # SubSection "Display" > # Depth 4 > # EndSubSection > # SubSection "Display" > # Depth 8 > # EndSubSection > # SubSection "Display" > # Depth 15 > # EndSubSection > # SubSection "Display" > # Depth 16 > # EndSubSection > SubSection "Display" > Depth 24 > Modes "1024x768" "800x600" "640x480" > EndSubSection > EndSection > > - Jason Barnes > > **** Jason Wayne Barnes **** -- "Active on the internet." **** > > > To Unsubscribe: send mail to [EMAIL PROTECTED] > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-questions" in the body of the message