On Sun, Jul 14, 2002 at 12:12:28PM -0700, Balaji, Pavan wrote: > > /etc/inetd.conf just gives an option for telnet, but not for 'rsh'. I'm not > able to get 'rsh' working yet. Any other suggestions?
For the bog-standard Berkeley rsh, you want to allow "shell": shell stream tcp nowait root /usr/libexec/rshd rshd If you are using the Kerberised rsh, use this instead: kshell stream tcp nowait root /usr/libexec/rshd rshd -k Bear in mind that ssh offers far greater security than either telnet or rsh, and has a mode of operation that mimics the traditional "r" commands pretty well. There are good, freely-available ssh clients out there for most OSes, so interoperability shouldn't be a problem. Anyway, lecture over ;-) HTH, Dan -- Daniel Bye PGP Key: ftp://ftp.slightlystrange.org/pgpkey/dan.asc PGP Key fingerprint: 3D73 AF47 D448 C5CA 88B4 0DCF 849C 1C33 3C48 2CDC _ ASCII ribbon campaign ( ) - against HTML, vCards and X - proprietary attachments in e-mail / \ To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-questions" in the body of the message