I've looked through what I can of the Handbook and FAQ but can't seem to find an answer.
I have added a Maxtor UltraATA/100 PCI Adaptor Card to one of my machines (to replace failing on-board IDE controllers). On boot, I see that it is detected and it detects the hard drive attached to it. However, I have two problems. 1) The CD-ROM attached to the card is not detected. 2) The devices don't exist in /dev to do anything with it. I have tried to use 'MAKEDEV all' to get the devices to appear there, but it doesn't seem to do it. Do I have to add the devices manually? exerpt from dmesg: atapci1: <Promise ATA100 controller> port 0xec00-0xec3f,0xe800-0xe803,0xe400-0xe407,0xe000-0xe003,0xdc00-0xdc07 mem 0xee000000-0xee01ffff irq 11 at device 10.0 on pci0 ata2: at 0xdc00 on atapci1 ata3: at 0xe400 on atapci1 <snip> ad2: 2014MB <Maxtor 82160D2> [4092/16/63] at ata1-master UDMA33 ad3: 12416MB <GENERIC GENERIC> [25228/16/63] at ata1-slave UDMA33 ad4: 4121MB <Maxtor 90432D2> [8374/16/63] at ata2-master UDMA33 To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-questions" in the body of the message