Hello, recently I rebooted my box (FreeBSD 4.6-STABLE) and since this reboot, dhcpd cannot bind to any interface. I upgraded to FreeBSD 4.7-PRERELEASE then rebooted, same thing. The configuration file is ok and untouched for many months. I use isc-dhcp provided with FreeBSD.
Log: --- Internet Software Consortium DHCP Server V3.0.1rc9 Copyright 1995-2001 Internet Software Consortium. All rights reserved. For info, please visit http://www.isc.org/products/DHCP Wrote 0 deleted host decls to leases file. Wrote 0 new dynamic host decls to leases file. Wrote 0 leases to leases file. rl0: not found If you did not get this software from ftp.isc.org, please get the latest from ftp.isc.org and install that before requesting help. If you did get this software from ftp.isc.org and have not yet read the README, please read it before requesting help. If you intend to request help from the [EMAIL PROTECTED] mailing list, please read the section on the README about submitting bug reports and requests for help. Please do not under any circumstances send requests for help directly to the authors of this software - please send them to the appropriate mailing list as described in the README file. exiting. --- The configuration file is: --- option domain-name "tarakan"; option domain-name-servers 192.168.1.2, 62.4.17.109, 62.4.16.70; max-lease-time 172800; default-lease-time 172800; subnet 192.168.1.0 netmask 255.255.255.0 { allow unknown-clients; range 192.168.1.100 192.168.1.200; option subnet-mask 255.255.255.0; option broadcast-address 192.168.1.255; option routers 192.168.1.2; option domain-name-servers 192.168.1.2, 62.4.17.109, 62.4.16.70; # 172800 secondes = 2 jours option netbios-name-servers 192.168.1.2; option netbios-dd-server 192.168.1.2; option netbios-node-type 8; } allow booting; --- #ifconfig rl0 rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet 192.168.1.2 netmask 0xffffff00 broadcast 192.168.1.255 inet6 fe80::2d0:70ff:fe02:61f3%rl0 prefixlen 64 scopeid 0x2 ether 00:d0:70:02:61:f3 media: Ethernet autoselect (100baseTX <full-duplex>) status: active rl0 is up and working very well. How can I fix my problem ? Regards, -- Chojin To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-questions" in the body of the message