I've recently purchased a Hercules Game Theatre XP and it gets horrible
performance in FreeBSD. In windows with the drivers the sound is beautiful.
There is a lot of crackling in FreeBSD. I'm suspecting that it is a driver
problem. My dmesg is below. Is there a driver for this card in FreeBSD?
I've looked around for a linux driver, but apparently there isn't one either.
If not I would be willing to help anyone code/test a driver.
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-PRERELEASE #5: Wed Sep 11 10:00:11 EDT 2002
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/BIGGUY
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Duron(tm) processor (651.48-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x630 Stepping = 0
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
real memory = 268369920 (262080K bytes)
avail memory = 257687552 (251648K bytes)
Preloaded elf kernel "kernel" at 0xc0384000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 8 entries at 0xc00fdd80
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge> mem
0xd8000000-0xd9ffffff at device 0.0 on pci0
pcib1: <VIA 8363 (Apollo KT133) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia model 0110 graphics accelerator> at 0.0 irq 11
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xe000-0xe00f at device 7.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 9 at device 7.2 on
pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 2
uhub1: 4 ports with 4 removable, self powered
viapropm0: SMBus I/O base at 0x5000
viapropm0: <VIA VT82C686A Power Management Unit> port 0x5000-0x500f at device
7.4 on pci0
viapropm0: SMBus revision code 0x0
smb0: <SMBus general purpose I/O> on smbus0
dc0: <LC82C115 PNIC II 10/100BaseTX> port 0xec00-0xecff mem
0xdd103000-0xdd1030ff irq 11 at device 8.0 on pci0
dc0: Ethernet address: 00:00:94:b6:42:bc
miibus0: <MII bus> on dc0
dcphy0: <Intel 21143 NWAY media interface> on miibus0
dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bktr0: <BrookTree 878> mem 0xdd100000-0xdd100fff irq 10 at device 9.0 on pci0
iicbb0: <I2C bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
iic0: <I2C general purpose I/O> on iicbus0
iicbus1: <Philips I2C bus> on iicbb0 master-only
iic1: <I2C general purpose I/O> on iicbus1
smbus1: <System Management Bus> on bti2c0
smb1: <SMBus general purpose I/O> on smbus1
bktr0: Warning - card vendor 0x1002 (model 0x0003) unknown.
bktr0: Pinnacle/Miro TV, Temic NTSC tuner.
pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 9.1 irq 10
csa0: <CS4280/CS4614/CS4622/CS4624/CS4630> mem
0xdd000000-0xdd0fffff,0xdd102000-0xdd102fff irq 5 at device 10.0 on pci0
csa: card is Hercules Game Theatre XP
pcm0: <CS461x PCM Audio> on csa0
orm0: <Option ROM> at iomem 0xc0000-0xcc7ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <HEWLETT-PACKARD DESKJET 920C> MLC,PCL,PML
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ad0: 14655MB <Maxtor 31536U2> [29777/16/63] at ata0-master UDMA66
ad1: 38166MB <WDC WD400AB-00CMB0> [77545/16/63] at ata0-slave UDMA66
acd0: CDROM <ATAPI 52X CDROM> at ata1-master UDMA33
Mounting root from ufs:/dev/ad1s1a
0457 : osDbgInit() XXX
nvidia0: <GeForce2 MX/MX 400> mem 0xd0000000-0xd7ffffff,0xda000000-0xdaffffff
irq 11 at device 0.0 on pci1
bktr0: Warning - card vendor 0x1002 (model 0x0003) unknown.
--
Anish Mistry
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
